Products

Our Genuine Rich Red COOLMAX® Balaclava transports moisture away from the body, keeping you Cool & Dry. With Fibre Based Moisture Management Properties that cannot be washed off!

Blended with Genuine LYCRA® Fibre to give you the freedom to move!

Our 2WA Designed Balaclava is perfect for any condition whilst greatly increasing helmet comfort, keeping you both Warm, Cool, Dry & Amazingly Comfortable in all weather conditions! Once you ride with one of our Genuine COOLMAX® & LYCRA® Blended Balaclavas, you won't ever want to ride without one!

COOLMAX® is a Registered Trademark of INVISTA™

LYCRA® MOVES YOU™

The Driest. The Warmest. The Most Comfortable Glove We've Ever Made.

Built for wet and cold weather riding without sacrificing protection or style. The 2WA™ ELITE 210 STEALTH DryTek Glove takes the proven RESPECT Glove design and rebuilds it with an all-new material construction engineered specifically for the worst conditions — in a low-cut, all-black/gold STEALTH design that pairs with any jacket or shirt.

When the weather turns, this is the glove you reach for.

Waterproof & Thermal Construction

The outer is constructed from 100% genuine leather, softSHELL®, and Suede AMARA® Super Fabric — your first defence against wet and cold. Inside, the entire glove is lined with 100% genuine HIPORA® 3-layer membrane: a cutting-edge microporous honeycomb structure with polyurethane coating that keeps water out while letting moisture escape, plus microscopic aluminium flakes for enhanced heat retention. HIPORA® meets OSHA Bloodborne Pathogens Standard (29CFR 1910.1030). Over that sits 3M THINSULATE® ultra-fine comfort liner microfibres that trap air and block radiant heat loss — keeping your hands warm without bulk.

Protection Features

• Genuine 100% leather, softSHELL® and Suede AMARA® Super Fabric outer construction
• Fully lined with 100% genuine HIPORA® waterproof membrane and 3M THINSULATE® comfort liner
• Kevlar® stitched fingers for ultimate burst strength and finger feel
• Kevlar® stitched outer fingers incorporating finger bridge protection
• Kevlar® stitched impact and palm area
• Carbon Kevlar® outer knuckles for increased protection
• Carbon upper and lower finger knuckle protectors
• Embedded protectors in finger knuckles
• Impact absorber on outer thumb and finger
• Kevlar® stitched softSHELL® and leather palm with impact absorber and impact sliders
• Pull-on tab with impact absorber for easier fitting and added wrist protection

Comfort & Control

• Vented outer TPU knuckles for airflow while remaining waterproof
• Suede leather upper palm, inner thumb and finger with honeycomb grip — enhanced throttle and bar grip, combats hand numbing
• Added accordion panel on thumb and fingers for greater bar comfort and finger movement
• Super soft high-grade AMARA® Super Fabric palm and inner fingers for bar comfort and durability
• Touchscreen compatible finger and thumb
• Velcro® close tab for quick fitting
• Rubber logo panel

Built for the Worst. Ready for the Rest.

Whether it's a cold morning commute or a wet weekend ride, the 2WA™ ELITE STEALTH DryTek Glove keeps your hands dry, warm, and fully protected — without compromising on feel or control. All-black STEALTH design. All-season capability.

DuPont™ and Kevlar® are trademarks of affiliates of DuPont de Nemours, Inc.

All 2WA™ products are designed to the highest standard using only 100% genuine certified materials including DuPont™ Kevlar®, SoftShell®, CE Certified Armour, YKK®, Velcro® and materials of the highest quality. Our products are designed to offer a layer of protection when armour is inserted correctly. They are not designed to prevent injury or death.

The Go-To Street Glove — Now in Bold Blue. MotoCAP Top 10. Proven in the Real World.

Same award-winning construction as our flagship RESPECT Glove — now available in a striking Bold Blue colourway. Already rated in the motoCAP.com.au top 10 and proven in a real high-speed accident without sustaining hand injury, the 2WA™ ELITE RESPECT Glove is our go-to street motorcycle glove in a low-cut design that pairs with any shirt or jacket.

Designed for all-round riding in both warmer and colder months, with far more protection than a regular street glove — and the colour to match your ride.

Materials & Construction

Constructed from full grain supple cow, goat and kangaroo leather, with a kangaroo leather palm for unmatched grip and durability. The entire glove is lined with 100% genuine DuPont™ Kevlar® Comfort Liner — upper and lower palm — delivering ultimate abrasion resistance and improved comfort. Fingers are reverse stitched for superior comfort and throttle feel. The outer fingers and palm are stitched with genuine 100% DuPont™ Kevlar® thread throughout.

Protection Features

• Full grain cow, goat and kangaroo leather construction
• Fully lined with 100% genuine DuPont™ Kevlar® Fibre Comfort Liner
• Reverse Kevlar® stitched fingers for ultimate comfort and finger feel
• Kevlar® stitched finger bridge to prevent finger roll and finger separation on impact — also aids throttle and lever control
• Kevlar® stitched impact and palm area
• Carbon Kevlar® outer knuckles with increased protection
• Carbon upper and lower finger knuckle protectors
• Embedded protectors in finger knuckles
• Impact absorber on outer thumb and finger
• Kevlar® stitched kangaroo leather palm with impact absorber and impact slider
• Pull-on tab with impact absorber for easier fitting and added wrist protection

Comfort & Airflow

• Perforated fingers and vented TPU knuckles for greater airflow
• Perforated goat leather upper palm, inner thumb and finger — better bar and throttle control, combats hand numbing
• Added accordion panel on the thumb and fingers for greater bar comfort and movement
• Super soft high-grade kangaroo leather palm and fingers for greater bar comfort and durability
• Touchscreen compatible fingertips and thumb
• Velcro® close tab for quick fitting
• Rubber logo panel

Proven on the Road. Built for the Street.

MotoCAP top 10 rated. Tested in real-world conditions. The 2WA™ ELITE Bold Blue RESPECT Glove — all the protection of our flagship glove, in a colour that stands out from the crowd.

DuPont™ and Kevlar® are trademarks of affiliates of DuPont de Nemours, Inc.

All 2WA™ products are designed to the highest standard using only 100% genuine certified materials including DuPont™ Kevlar®, SoftShell®, CE Certified Armour, YKK®, Velcro® and materials of the highest quality. Our products are designed to offer a layer of protection when armour is inserted correctly. They are not designed to prevent injury or death.

Protection-Grade Quality. Street-Ready Style.

The 2WA™ ELITE Level II Armoured Black CLASSIC Hoodie is built for riders who want maximum protection without sacrificing the look and feel of a premium streetwear hoodie. The all-black colourway with luminescent silver embroidery — featuring our trademarked 2WA™ Classic Logo on the back, sleeve branding, and “LIVE IT. LOVE IT. RIDE IT.” hem text — makes this one of the most striking hoodies in the range. With our in-house manufactured 460GSM heavy fleece outer and full DuPont™ Kevlar® lining throughout, it weighs just over 2kg with armour inserted and is one of the heaviest, most protective fleece hoodies on the market.

We believe every rider deserves to know exactly what they’re buying. That’s why we list every material type, thickness, and GSM specification — so you ride with confidence, not guesswork.

Protection You Can Feel Confident In

• Removable & adjustable 2WA™ Level II Low-Profile Viscoelastic CE Approved Elbow/Forearm, Shoulder and Back Armour — soft and body-forming until impact, then superior shock absorption kicks in.

• 220GSM 100% Genuine DuPont™ Kevlar® knitted weave lining throughout the entire hoodie — not just high-risk areas. We don’t use cheaper blended Kevlar® materials that can cause abrasion burns, shrink, or reduce breathability over time.

• 2WA™ Custom Raglan RyderSleeves — our custom sleeve design creates a stronger shoulder area with less stitching and higher burst strength to better protect from impacts in a slide.

Built Different

• Luminescent silver embroidery — our trademarked 2WA™ Classic Logo on the back, sleeve branding, and “LIVE IT. LOVE IT. RIDE IT.” hem text. Striking on black and built to last.

• 460GSM in-house manufactured heavy fleece outer — one of the toughest fleece hoodies on the market. Triple-layered for warmth and breathability, making it a great mid-to-cold weather riding jacket.

• 2WA™ Thumbed RyderCuffs — specially designed for greater coverage and comfort in riding position, keeping sleeves in place and cold air out.

• 2WA™ RyderHood — double-lined inside and out to cushion around the back of the helmet and block wind effectively.

• 2WA™ Straight Cut RyderBak — designed for that urban street look with rider fit and comfort in mind.

• 2WA™ RyderLoop to attach to your 2WA™ joggers or jeans and keep everything in place on the bike.

• High-quality superfine 100% poly mesh liner for comfort and airflow between rider and hoodie.

Other brands charge extra for CE protectors or skimp on Kevlar®, only lining high-risk areas without disclosing grades. We use full 100% genuine 220GSM–260GSM DuPont™ Kevlar® weave and include CE Level II armour in every 2WA™ product — at no extra cost.

DuPont™ and Kevlar® are trademarks of affiliates of DuPont de Nemours, Inc.

All 2WA™ products are designed to the highest standard using only 100% genuine certified materials including DuPont™ Kevlar®, CE Certified Armour, YKK®, and Velcro®. Our products are designed to offer a layer of protection when armour is inserted correctly. They are not designed to prevent injury or death.

Last Chance — Discontinued to Make Way for Our New '26 OFFICIAL STEALTH Design.

The 2WA™ ELITE Level II Armoured Black OFFICIAL 210 STEALTH Pullover Hoodie is being cleared as we make way for our all-new 2026 OFFICIAL STEALTH design. The all-black OFFICIAL colourway with tonal black-on-black embroidery — same protection-grade build, same genuine materials, same 460GSM heavy fleece — now at a significantly reduced price. Stock is limited. Once they’re gone, this design is gone for good.

Protection You Can Feel Confident In

• Removable & adjustable 2WA™ Level II Low-Profile Viscoelastic CE Approved Elbow/Forearm, Shoulder and Back Armour — soft and body-forming until impact, then superior shock absorption kicks in.

• 220GSM 100% Genuine DuPont™ Kevlar® knitted weave lining throughout the entire hoodie — not just high-risk areas. We don’t use cheaper blended Kevlar® materials that can cause abrasion burns, shrink, or reduce breathability over time.

• 2WA™ Custom Raglan RyderSleeves — our custom sleeve design creates a stronger shoulder area with less stitching and higher burst strength to better protect from impacts in a slide.

Built Different

• 460GSM in-house manufactured heavy fleece outer — one of the toughest fleece hoodies on the market. Triple-layered for warmth and breathability, making it a great mid-to-cold weather riding jacket.

• 2WA™ Thumbed RyderCuffs — specially designed for greater coverage and comfort in riding position, keeping sleeves in place and cold air out.

• 2WA™ RyderHood — double-lined inside and out to cushion around the back of the helmet and block wind effectively.

• 2WA™ Straight Cut RyderBak — designed for that urban street look with rider fit and comfort in mind.

• 2WA™ RyderLoop to attach to your 2WA™ joggers or jeans and keep everything in place on the bike.

• High-quality superfine 100% poly mesh liner for comfort and airflow between rider and hoodie.

• Tonal black-on-black embroidered 2WA™ logos — subtle, sleek, and built to last.

Other brands charge extra for CE protectors or skimp on Kevlar®, only lining high-risk areas without disclosing grades. We use full 100% genuine 220GSM–260GSM DuPont™ Kevlar® weave and include CE Level II armour in every 2WA™ product — at no extra cost.

DuPont™ and Kevlar® are trademarks of affiliates of DuPont de Nemours, Inc.

All 2WA™ products are designed to the highest standard using only 100% genuine certified materials including DuPont™ Kevlar®, CE Certified Armour, YKK®, and Velcro®. Our products are designed to offer a layer of protection when armour is inserted correctly. They are not designed to prevent injury or death.

Model wearing size 2XL.

The Trackies That Nobody Knows Are Protective Riding Pants — Now in OFFICIAL Edition.

The 2WA™ ELITE Level II Armoured Black OFFICIAL RYDERZ Trak Daks take everything that makes our Trak Daks the ultimate in casual protective streetwear — and elevate it with luminescent silver & gold embroidery for a premium finish that turns heads on and off the bike. Same protection-grade build. Next-level style.

Protection You Can Feel Confident In

• Removable & adjustable 2WA™ SW ELITE Level II CE Approved Knee/Shin and Hip Armour — soft and body-forming until impact, then superior shock absorption kicks in.

• 220GSM 100% Genuine DuPont™ Kevlar® knitted weave lining throughout the entire pant — not just high-risk areas. We don’t use cheaper blended Kevlar® materials that can cause abrasion burns, shrink, or reduce breathability over time.

• MotoCAP rated 10/10 Burst Strength and 9/10 Impact Resistance — independently tested and outperforming many popular denim riding jeans.

• 2WA™ custom inner leg design with adjustable Knee/Shin armour pockets to position protection exactly where you need it for your riding style and height.

• 2WA™ custom seam design for extra strength and comfort — contributing to that 10/10 burst strength rating.

Built Different

• Luminescent silver & gold embroidery — the OFFICIAL edition signature finish that sets these apart from the standard range.

• 460GSM in-house manufactured heavy fleece outer — one of the toughest fleece track pants on the market, designed to look like premium trackies while hiding everything underneath.

• Superfine mesh liner for comfort and airflow in warmer months.

• YKK® zipped deep side and rear pockets to keep valuables secure while riding.

• Extra thick double elastic ankle cuffs to keep pants and armour in place on the bike and in the event of a fall.

• Extra thick double elastic waistband with drawstring.

• 2WA™ single hidden RyderLoop at the back to attach your 2WA™ hoodie or jacket.

• All embroidered 2WA™ logos for long-lasting style.

Other brands charge extra for CE protectors or skimp on Kevlar® by only lining high-risk areas. We use full 100% genuine DuPont™ Kevlar® throughout and include our Level II CE protectors — at no extra cost.

DuPont™ and Kevlar® are trademarks of affiliates of DuPont de Nemours, Inc.

All 2WA™ products are designed to the highest standard using only 100% genuine certified materials including DuPont™ Kevlar®, CE Certified Armour, YKK®, and Velcro®. Our products are designed to offer a layer of protection when armour is inserted correctly. They are not designed to prevent injury or death.

Last Chance — Discontinued to Make Way for Our New Design.

The 2WA™ ELITE Level II Armoured Black OFFICIAL V2 Hoodie is being cleared as we make way for our all-new design. A full-zip hoodie with bold all-over white embroidery — featuring the iconic 210 “TWO WHEELS AND ZERO PROBLEMS” back design, multi-graphic sleeve branding, and TWA chest logo — same protection-grade build, same genuine materials, same 460GSM heavy fleece, now at a significantly reduced price. Once the remaining stock is gone, this design is gone for good.

Protection You Can Feel Confident In

• Removable & adjustable 2WA™ Level II Low-Profile Viscoelastic CE Approved Elbow/Forearm, Shoulder and Back Armour — soft and body-forming until impact, then superior shock absorption kicks in.

• 220GSM 100% Genuine DuPont™ Kevlar® knitted weave lining throughout the entire hoodie — not just high-risk areas. We don’t use cheaper blended Kevlar® materials that can cause abrasion burns, shrink, or reduce breathability over time.

• 2WA™ Custom Raglan RyderSleeves — our custom sleeve design creates a stronger shoulder area with less stitching and higher burst strength to better protect from impacts in a slide.

Built Different

• Full-zip construction — easy on and off over riding gear, with a clean zip placket finish.

• Bold all-over white embroidery — 210 “TWO WHEELS AND ZERO PROBLEMS” back design, multi-graphic sleeve branding including 2WA, //W, and 2WHEELAPPEAL, plus TWA chest logo.

• 460GSM in-house manufactured heavy fleece outer — one of the toughest fleece hoodies on the market. Triple-layered for warmth and breathability.

• 2WA™ Thumbed RyderCuffs — specially designed for greater coverage and comfort in riding position, keeping sleeves in place and cold air out.

• 2WA™ RyderHood — double-lined inside and out to cushion around the back of the helmet and block wind effectively.

• 2WA™ Straight Cut RyderBak — designed for that urban street look with rider fit and comfort in mind.

• 2WA™ RyderLoop to attach to your 2WA™ joggers or jeans and keep everything in place on the bike.

• High-quality superfine 100% poly mesh liner for comfort and airflow between rider and hoodie.

Other brands charge extra for CE protectors or skimp on Kevlar®, only lining high-risk areas without disclosing grades. We use full 100% genuine 220GSM–260GSM DuPont™ Kevlar® weave and include CE Level II armour in every 2WA™ product — at no extra cost.

DuPont™ and Kevlar® are trademarks of affiliates of DuPont de Nemours, Inc.

All 2WA™ products are designed to the highest standard using only 100% genuine certified materials including DuPont™ Kevlar®, CE Certified Armour, YKK®, and Velcro®. Our products are designed to offer a layer of protection when armour is inserted correctly. They are not designed to prevent injury or death.

The Trackies That Nobody Knows Are Protective Riding Pants.

The 2WA™ ELITE Level II Armoured Black RYDERZ Trak Daks are built for riders who want maximum protection without giving up the look and feel of everyday trackies. With our in-house manufactured 460GSM heavy fleece outer and full DuPont™ Kevlar® lining, these are the ultimate in casual protective streetwear — independently MotoCAP tested and rated higher than many popular denim riding jeans.

Protection You Can Feel Confident In

• Removable & adjustable 2WA™ SW ELITE Level II CE Approved Knee/Shin and Hip Armour — soft and body-forming until impact, then superior shock absorption kicks in.

• 220GSM 100% Genuine DuPont™ Kevlar® knitted weave lining throughout the entire pant — not just high-risk areas. We don’t use cheaper blended Kevlar® materials that can cause abrasion burns, shrink, or reduce breathability over time.

• MotoCAP rated 10/10 Burst Strength and 9/10 Impact Resistance — independently tested and outperforming many popular denim riding jeans.

• 2WA™ custom inner leg design with adjustable Knee/Shin armour pockets to position protection exactly where you need it for your riding style and height.

• 2WA™ custom seam design for extra strength and comfort — contributing to that 10/10 burst strength rating.

Built Different

• 460GSM in-house manufactured heavy fleece outer — one of the toughest fleece track pants on the market, designed to look like regular trackies while hiding everything underneath.

• Superfine mesh liner for comfort and airflow in warmer months.

• YKK® zipped deep side and rear pockets to keep valuables secure while riding.

• Extra thick double elastic ankle cuffs to keep pants and armour in place on the bike and in the event of a fall.

• Extra thick double elastic waistband with drawstring.

• 2WA™ single hidden RyderLoop at the back to attach your 2WA™ hoodie or jacket.

• All embroidered 2WA™ logos for long-lasting style.

Other brands charge extra for CE protectors or skimp on Kevlar® by only lining high-risk areas. We use full 100% genuine DuPont™ Kevlar® throughout and include our Level II CE protectors — at no extra cost.

DuPont™ and Kevlar® are trademarks of affiliates of DuPont de Nemours, Inc.

All 2WA™ products are designed to the highest standard using only 100% genuine certified materials including DuPont™ Kevlar®, CE Certified Armour, YKK®, and Velcro®. Our products are designed to offer a layer of protection when armour is inserted correctly. They are not designed to prevent injury or death.

All Black. Full Protection. Nobody Needs to Know.

The 2WA™ ELITE Level II Armoured Black STEALTH Fleece Hoodie is our definitive all-black colourway — clean, understated, and built to protect. With our in-house manufactured 460GSM heavy fleece outer and full DuPont™ Kevlar® lining throughout, it’s the hoodie that looks like streetwear and performs like armour. Weighing just over 2kg with armour inserted, this is the heaviest, most protective fleece hoodie we make.

We believe every rider deserves to know exactly what they’re buying. That’s why we list every material type, thickness, and GSM specification — so you ride with confidence, not guesswork.

Protection You Can Feel Confident In

• Removable & adjustable 2WA™ Level II Low-Profile Viscoelastic CE Approved Elbow/Forearm, Shoulder and Back Armour — soft and body-forming until impact, then superior shock absorption kicks in.

• 220GSM 100% Genuine DuPont™ Kevlar® knitted weave lining throughout the entire hoodie — not just high-risk areas. We don’t use cheaper blended Kevlar® materials that can cause abrasion burns, shrink, or reduce breathability over time.

• 2WA™ Custom Raglan RyderSleeves — our custom sleeve design creates a stronger shoulder area with less stitching and higher burst strength to better protect from impacts in a slide.

Built Different

• 460GSM in-house manufactured heavy fleece outer — one of the toughest fleece hoodies on the market. Triple-layered for warmth and breathability, making it a great mid-to-cold weather riding jacket.

• 2WA™ Thumbed RyderCuffs — specially designed for greater coverage and comfort in riding position, keeping sleeves in place and cold air out.

• 2WA™ RyderHood — double-lined inside and out to cushion around the back of the helmet and block wind effectively.

• 2WA™ Straight Cut RyderBak — designed for that urban street look with rider fit and comfort in mind.

• 2WA™ RyderLoop to attach to your 2WA™ joggers or jeans and keep everything in place on the bike.

• High-quality superfine 100% poly mesh liner for comfort and airflow between rider and hoodie.

• All embroidered 2WA™ logos for long-lasting style that won’t fade or peel.

Other brands charge extra for CE protectors or skimp on Kevlar®, only lining high-risk areas without disclosing grades. We use full 100% genuine 220GSM–260GSM DuPont™ Kevlar® weave and include CE Level II armour in every 2WA™ product — at no extra cost.

DuPont™ and Kevlar® are trademarks of affiliates of DuPont de Nemours, Inc.

All 2WA™ products are designed to the highest standard using only 100% genuine certified materials including DuPont™ Kevlar®, CE Certified Armour, YKK®, and Velcro®. Our products are designed to offer a layer of protection when armour is inserted correctly. They are not designed to prevent injury or death.

The Trackies That Nobody Knows Are Protective Riding Pants — Now in OFFICIAL Edition.

The 2WA™ ELITE Level II Armoured Grey OFFICIAL RYDERZ Trak Daks take everything that makes our Trak Daks the ultimate in casual protective streetwear — and elevate it with luminescent silver & gold embroidery for a premium finish that turns heads on and off the bike. The Grey colourway adds a versatile, understated edge to the OFFICIAL edition. Same protection-grade build. Next-level style.

Protection You Can Feel Confident In

• Removable & adjustable 2WA™ SW ELITE Level II CE Approved Knee/Shin and Hip Armour — soft and body-forming until impact, then superior shock absorption kicks in.

• 220GSM 100% Genuine DuPont™ Kevlar® knitted weave lining throughout the entire pant — not just high-risk areas. We don’t use cheaper blended Kevlar® materials that can cause abrasion burns, shrink, or reduce breathability over time.

• MotoCAP rated 10/10 Burst Strength and 9/10 Impact Resistance — independently tested and outperforming many popular denim riding jeans.

• 2WA™ custom inner leg design with adjustable Knee/Shin armour pockets to position protection exactly where you need it for your riding style and height.

• 2WA™ custom seam design for extra strength and comfort — contributing to that 10/10 burst strength rating.

Built Different

• Luminescent silver & gold embroidery — the OFFICIAL edition signature finish that sets these apart from the standard range.

• 460GSM in-house manufactured heavy fleece outer — one of the toughest fleece track pants on the market, designed to look like premium trackies while hiding everything underneath.

• Superfine mesh liner for comfort and airflow in warmer months.

• YKK® zipped deep side and rear pockets to keep valuables secure while riding.

• Extra thick double elastic ankle cuffs to keep pants and armour in place on the bike and in the event of a fall.

• Extra thick double elastic waistband with drawstring.

• 2WA™ single hidden RyderLoop at the back to attach your 2WA™ hoodie or jacket.

• All embroidered 2WA™ logos for long-lasting style.

Other brands charge extra for CE protectors or skimp on Kevlar® by only lining high-risk areas. We use full 100% genuine DuPont™ Kevlar® throughout and include our Level II CE protectors — at no extra cost.

DuPont™ and Kevlar® are trademarks of affiliates of DuPont de Nemours, Inc.

All 2WA™ products are designed to the highest standard using only 100% genuine certified materials including DuPont™ Kevlar®, CE Certified Armour, YKK®, and Velcro®. Our products are designed to offer a layer of protection when armour is inserted correctly. They are not designed to prevent injury or death.

The Trackies That Nobody Knows Are Protective Riding Pants.

The 2WA™ ELITE Level II Armoured Grey RYDERZ Trak Daks are built for riders who want maximum protection without giving up the look and feel of everyday trackies. With our in-house manufactured 460GSM heavy fleece outer and full DuPont™ Kevlar® lining, these are the ultimate in casual protective streetwear — independently MotoCAP tested and rated higher than many popular denim riding jeans.

Protection You Can Feel Confident In

• Removable & adjustable 2WA™ SW ELITE Level II CE Approved Knee/Shin and Hip Armour — soft and body-forming until impact, then superior shock absorption kicks in.

• 220GSM 100% Genuine DuPont™ Kevlar® knitted weave lining throughout the entire pant — not just high-risk areas. We don’t use cheaper blended Kevlar® materials that can cause abrasion burns, shrink, or reduce breathability over time.

• MotoCAP rated 10/10 Burst Strength and 9/10 Impact Resistance — independently tested and outperforming many popular denim riding jeans.

• 2WA™ custom inner leg design with adjustable Knee/Shin armour pockets to position protection exactly where you need it for your riding style and height.

• 2WA™ custom seam design for extra strength and comfort — contributing to that 10/10 burst strength rating.

Built Different

• 460GSM in-house manufactured heavy fleece outer — one of the toughest fleece track pants on the market, designed to look like regular trackies while hiding everything underneath.

• Superfine mesh liner for comfort and airflow in warmer months.

• YKK® zipped deep side and rear pockets to keep valuables secure while riding.

• Extra thick double elastic ankle cuffs to keep pants and armour in place on the bike and in the event of a fall.

• Extra thick double elastic waistband with drawstring.

• 2WA™ single hidden RyderLoop at the back to attach your 2WA™ hoodie or jacket.

• All embroidered 2WA™ logos for long-lasting style.

Other brands charge extra for CE protectors or skimp on Kevlar® by only lining high-risk areas. We use full 100% genuine DuPont™ Kevlar® throughout and include our Level II CE protectors — at no extra cost.

DuPont™ and Kevlar® are trademarks of affiliates of DuPont de Nemours, Inc.

All 2WA™ products are designed to the highest standard using only 100% genuine certified materials including DuPont™ Kevlar®, CE Certified Armour, YKK®, and Velcro®. Our products are designed to offer a layer of protection when armour is inserted correctly. They are not designed to prevent injury or death.

Protection-Grade Quality. Street-Ready Style.

The 2WA™ ELITE Level II Armoured LIGHT V DARK CLASSIC Hoodie is built for riders who want maximum protection without sacrificing the look and feel of a premium streetwear hoodie. The Light V Dark colourway brings bold contrast styling to our heaviest, most protective fleece hoodie — weighing just over 2kg with armour inserted, built with our in-house manufactured 460GSM heavy fleece outer and full DuPont™ Kevlar® lining throughout.

We believe every rider deserves to know exactly what they’re buying. That’s why we list every material type, thickness, and GSM specification — so you ride with confidence, not guesswork.

Protection You Can Feel Confident In

• Removable & adjustable 2WA™ Level II Low-Profile Viscoelastic CE Approved Elbow/Forearm, Shoulder and Back Armour — soft and body-forming until impact, then superior shock absorption kicks in.

• 220GSM 100% Genuine DuPont™ Kevlar® knitted weave lining throughout the entire hoodie — not just high-risk areas. We don’t use cheaper blended Kevlar® materials that can cause abrasion burns, shrink, or reduce breathability over time.

• 2WA™ Custom Raglan RyderSleeves — our custom sleeve design creates a stronger shoulder area with less stitching and higher burst strength to better protect from impacts in a slide.

Built Different

• 460GSM in-house manufactured heavy fleece outer — one of the toughest fleece hoodies on the market. Triple-layered for warmth and breathability, making it a great mid-to-cold weather riding jacket.

• 2WA™ Thumbed RyderCuffs — specially designed for greater coverage and comfort in riding position, keeping sleeves in place and cold air out.

• 2WA™ RyderHood — double-lined inside and out to cushion around the back of the helmet and block wind effectively.

• 2WA™ Straight Cut RyderBak — designed for that urban street look with rider fit and comfort in mind.

• 2WA™ RyderLoop to attach to your 2WA™ joggers or jeans and keep everything in place on the bike.

• High-quality superfine 100% poly mesh liner for comfort and airflow between rider and hoodie.

• All embroidered 2WA™ logos for long-lasting style that won’t fade or peel.

Other brands charge extra for CE protectors or skimp on Kevlar®, only lining high-risk areas without disclosing grades. We use full 100% genuine 220GSM–260GSM DuPont™ Kevlar® weave and include CE Level II armour in every 2WA™ product — at no extra cost.

DuPont™ and Kevlar® are trademarks of affiliates of DuPont de Nemours, Inc.

All 2WA™ products are designed to the highest standard using only 100% genuine certified materials including DuPont™ Kevlar®, CE Certified Armour, YKK®, and Velcro®. Our products are designed to offer a layer of protection when armour is inserted correctly. They are not designed to prevent injury or death.

Model wearing size XL.

Last Chance — Discontinued to Make Way for Our New '26 OFFICIAL Design.

The 2WA™ ELITE Level II Armoured LIGHT V DARK OFFICIAL 210 Scoop Cut Pullover Hoodie is being cleared as we make way for our all-new 2026 OFFICIAL Light V Dark design. The Scoop Cut Pullover silhouette — same protection-grade build, same genuine materials, same 460GSM heavy fleece — now at a significantly reduced price. Stock is limited across sizes. Once they’re gone, this design is gone for good.

Protection You Can Feel Confident In

• Removable & adjustable 2WA™ Level II Low-Profile Viscoelastic CE Approved Elbow/Forearm, Shoulder and Back Armour — soft and body-forming until impact, then superior shock absorption kicks in.

• 220GSM 100% Genuine DuPont™ Kevlar® knitted weave lining throughout the entire hoodie — not just high-risk areas. We don’t use cheaper blended Kevlar® materials that can cause abrasion burns, shrink, or reduce breathability over time.

• 2WA™ Custom Raglan RyderSleeves — our custom sleeve design creates a stronger shoulder area with less stitching and higher burst strength to better protect from impacts in a slide.

Built Different

• 460GSM in-house manufactured heavy fleece outer — one of the toughest fleece hoodies on the market. Triple-layered for warmth and breathability, making it a great mid-to-cold weather riding jacket.

• 2WA™ Thumbed RyderCuffs — specially designed for greater coverage and comfort in riding position, keeping sleeves in place and cold air out.

• 2WA™ RyderHood — double-lined inside and out to cushion around the back of the helmet and block wind effectively.

• 2WA™ Straight Cut RyderBak — designed for that urban street look with rider fit and comfort in mind.

• 2WA™ RyderLoop to attach to your 2WA™ joggers or jeans and keep everything in place on the bike.

• High-quality superfine 100% poly mesh liner for comfort and airflow between rider and hoodie.

• All embroidered 2WA™ logos for long-lasting style that won’t fade or peel.

Other brands charge extra for CE protectors or skimp on Kevlar®, only lining high-risk areas without disclosing grades. We use full 100% genuine 220GSM–260GSM DuPont™ Kevlar® weave and include CE Level II armour in every 2WA™ product — at no extra cost.

DuPont™ and Kevlar® are trademarks of affiliates of DuPont de Nemours, Inc.

All 2WA™ products are designed to the highest standard using only 100% genuine certified materials including DuPont™ Kevlar®, CE Certified Armour, YKK®, and Velcro®. Our products are designed to offer a layer of protection when armour is inserted correctly. They are not designed to prevent injury or death.

Model wearing size XS.

Last Chance — Discontinued to Make Way for Our New '26 OFFICIAL Design.

The 2WA™ ELITE Level II Armoured LIGHT V DARK OFFICIAL V2 Hoodie is being cleared as we make way for our all-new 2026 OFFICIAL Light V Dark design. Same protection-grade build, same genuine materials, same 460GSM heavy fleece — now at a significantly reduced price. Only a handful of sizes remain. Once they’re gone, this design is gone for good.

Protection You Can Feel Confident In

• Removable & adjustable 2WA™ Level II Low-Profile Viscoelastic CE Approved Elbow/Forearm, Shoulder and Back Armour — soft and body-forming until impact, then superior shock absorption kicks in.

• 220GSM 100% Genuine DuPont™ Kevlar® knitted weave lining throughout the entire hoodie — not just high-risk areas. We don’t use cheaper blended Kevlar® materials that can cause abrasion burns, shrink, or reduce breathability over time.

• 2WA™ Custom Raglan RyderSleeves — our custom sleeve design creates a stronger shoulder area with less stitching and higher burst strength to better protect from impacts in a slide.

Built Different

• 460GSM in-house manufactured heavy fleece outer — one of the toughest fleece hoodies on the market. Triple-layered for warmth and breathability, making it a great mid-to-cold weather riding jacket.

• 2WA™ Thumbed RyderCuffs — specially designed for greater coverage and comfort in riding position, keeping sleeves in place and cold air out.

• 2WA™ RyderHood — double-lined inside and out to cushion around the back of the helmet and block wind effectively.

• 2WA™ Straight Cut RyderBak — designed for that urban street look with rider fit and comfort in mind.

• 2WA™ RyderLoop to attach to your 2WA™ joggers or jeans and keep everything in place on the bike.

• High-quality superfine 100% poly mesh liner for comfort and airflow between rider and hoodie.

• All embroidered 2WA™ logos for long-lasting style that won’t fade or peel.

Other brands charge extra for CE protectors or skimp on Kevlar®, only lining high-risk areas without disclosing grades. We use full 100% genuine 220GSM–260GSM DuPont™ Kevlar® weave and include CE Level II armour in every 2WA™ product — at no extra cost.

DuPont™ and Kevlar® are trademarks of affiliates of DuPont de Nemours, Inc.

All 2WA™ products are designed to the highest standard using only 100% genuine certified materials including DuPont™ Kevlar®, CE Certified Armour, YKK®, and Velcro®. Our products are designed to offer a layer of protection when armour is inserted correctly. They are not designed to prevent injury or death.

Protection-Grade Quality. Street-Ready Style. Made for Everyone.

The 2WA™ ELITE Level II Armoured White CLASSIC Fleece Hoodie is built for riders who want maximum protection without sacrificing the look and feel of a premium streetwear hoodie. The White CLASSIC colourway is clean, versatile, and truly unisex — designed to look and fit great on every body. Finished with luminescent silver embroidery, it’s the current edition of this design before the all-new ‘26 model arrives with silver and gold. With our in-house manufactured 460GSM heavy fleece outer and full DuPont™ Kevlar® lining throughout, it weighs just over 2kg with armour inserted and is one of the heaviest, most protective fleece hoodies on the market.

We believe every rider deserves to know exactly what they’re buying. That’s why we list every material type, thickness, and GSM specification — so you ride with confidence, not guesswork.

Protection You Can Feel Confident In

• Removable & adjustable 2WA™ Level II Low-Profile Viscoelastic CE Approved Elbow/Forearm, Shoulder and Back Armour — soft and body-forming until impact, then superior shock absorption kicks in.

• 220GSM 100% Genuine DuPont™ Kevlar® knitted weave lining throughout the entire hoodie — not just high-risk areas. We don’t use cheaper blended Kevlar® materials that can cause abrasion burns, shrink, or reduce breathability over time.

• 2WA™ Custom Raglan RyderSleeves — our custom sleeve design creates a stronger shoulder area with less stitching and higher burst strength to better protect from impacts in a slide.

Built Different

• 460GSM in-house manufactured heavy fleece outer — one of the toughest fleece hoodies on the market. Triple-layered for warmth and breathability, making it a great mid-to-cold weather riding jacket.

• Truly unisex fit — designed and sized to look and feel great on all body types. See our product photos for both male and female fit references.

• Luminescent silver embroidered 2WA™ logos — the signature finish of this edition, striking against the white fleece and built to last.

• 2WA™ Thumbed RyderCuffs — specially designed for greater coverage and comfort in riding position, keeping sleeves in place and cold air out.

• 2WA™ RyderHood — double-lined inside and out to cushion around the back of the helmet and block wind effectively.

• 2WA™ Straight Cut RyderBak — designed for that urban street look with rider fit and comfort in mind.

• 2WA™ RyderLoop to attach to your 2WA™ joggers or jeans and keep everything in place on the bike.

• High-quality superfine 100% poly mesh liner for comfort and airflow between rider and hoodie.

Other brands charge extra for CE protectors or skimp on Kevlar®, only lining high-risk areas without disclosing grades. We use full 100% genuine 220GSM–260GSM DuPont™ Kevlar® weave and include CE Level II armour in every 2WA™ product — at no extra cost.

DuPont™ and Kevlar® are trademarks of affiliates of DuPont de Nemours, Inc.

All 2WA™ products are designed to the highest standard using only 100% genuine certified materials including DuPont™ Kevlar®, CE Certified Armour, YKK®, and Velcro®. Our products are designed to offer a layer of protection when armour is inserted correctly. They are not designed to prevent injury or death.

Model wearing size XL.

Last Chance — Discontinued to Make Way for Our New '26 OFFICIAL STEALTH Design.

The 2WA™ ELITE Level II Armoured White OFFICIAL 210 STEALTH Pullover Hoodie is being cleared as we make way for our all-new 2026 OFFICIAL STEALTH design. The all-white OFFICIAL colourway with tonal white-on-white embroidery — same protection-grade build, same genuine materials, same 460GSM heavy fleece — now at a significantly reduced price. Stock is limited. Once they’re gone, this design is gone for good.

Protection You Can Feel Confident In

• Removable & adjustable 2WA™ Level II Low-Profile Viscoelastic CE Approved Elbow/Forearm, Shoulder and Back Armour — soft and body-forming until impact, then superior shock absorption kicks in.

• 220GSM 100% Genuine DuPont™ Kevlar® knitted weave lining throughout the entire hoodie — not just high-risk areas. We don’t use cheaper blended Kevlar® materials that can cause abrasion burns, shrink, or reduce breathability over time.

• 2WA™ Custom Raglan RyderSleeves — our custom sleeve design creates a stronger shoulder area with less stitching and higher burst strength to better protect from impacts in a slide.

Built Different

• 460GSM in-house manufactured heavy fleece outer — one of the toughest fleece hoodies on the market. Triple-layered for warmth and breathability, making it a great mid-to-cold weather riding jacket.

• 2WA™ Thumbed RyderCuffs — specially designed for greater coverage and comfort in riding position, keeping sleeves in place and cold air out.

• 2WA™ RyderHood — double-lined inside and out to cushion around the back of the helmet and block wind effectively.

• 2WA™ Straight Cut RyderBak — designed for that urban street look with rider fit and comfort in mind.

• 2WA™ RyderLoop to attach to your 2WA™ joggers or jeans and keep everything in place on the bike.

• High-quality superfine 100% poly mesh liner for comfort and airflow between rider and hoodie.

• Tonal white-on-white embroidered 2WA™ logos — subtle, clean, and built to last.

Other brands charge extra for CE protectors or skimp on Kevlar®, only lining high-risk areas without disclosing grades. We use full 100% genuine 220GSM–260GSM DuPont™ Kevlar® weave and include CE Level II armour in every 2WA™ product — at no extra cost.

DuPont™ and Kevlar® are trademarks of affiliates of DuPont de Nemours, Inc.

All 2WA™ products are designed to the highest standard using only 100% genuine certified materials including DuPont™ Kevlar®, CE Certified Armour, YKK®, and Velcro®. Our products are designed to offer a layer of protection when armour is inserted correctly. They are not designed to prevent injury or death.

Model wearing size 2XL.

Last Chance — This Design Has Been Discontinued.

The 2WA™ ELITE Level II Armoured White OFFICIAL V2 Fleece Hoodie is being cleared as we streamline our range. The all-white colourway with contrasting black embroidery — same protection-grade build, same genuine materials, same 460GSM heavy fleece — now at a significantly reduced price. Once the remaining stock is gone, this design will not be restocked.

Protection You Can Feel Confident In

• Removable & adjustable 2WA™ Level II Low-Profile Viscoelastic CE Approved Elbow/Forearm, Shoulder and Back Armour — soft and body-forming until impact, then superior shock absorption kicks in.

• 220GSM 100% Genuine DuPont™ Kevlar® knitted weave lining throughout the entire hoodie — not just high-risk areas. We don’t use cheaper blended Kevlar® materials that can cause abrasion burns, shrink, or reduce breathability over time.

• 2WA™ Custom Raglan RyderSleeves — our custom sleeve design creates a stronger shoulder area with less stitching and higher burst strength to better protect from impacts in a slide.

Built Different

• 460GSM in-house manufactured heavy fleece outer — one of the toughest fleece hoodies on the market. Triple-layered for warmth and breathability, making it a great mid-to-cold weather riding jacket.

• Contrasting black embroidered 2WA™ logos — bold against the white fleece and built to last.

• 2WA™ Thumbed RyderCuffs — specially designed for greater coverage and comfort in riding position, keeping sleeves in place and cold air out.

• 2WA™ RyderHood — double-lined inside and out to cushion around the back of the helmet and block wind effectively.

• 2WA™ Straight Cut RyderBak — designed for that urban street look with rider fit and comfort in mind.

• 2WA™ RyderLoop to attach to your 2WA™ joggers or jeans and keep everything in place on the bike.

• High-quality superfine 100% poly mesh liner for comfort and airflow between rider and hoodie.

Other brands charge extra for CE protectors or skimp on Kevlar®, only lining high-risk areas without disclosing grades. We use full 100% genuine 220GSM–260GSM DuPont™ Kevlar® weave and include CE Level II armour in every 2WA™ product — at no extra cost.

DuPont™ and Kevlar® are trademarks of affiliates of DuPont de Nemours, Inc.

All 2WA™ products are designed to the highest standard using only 100% genuine certified materials including DuPont™ Kevlar®, CE Certified Armour, YKK®, and Velcro®. Our products are designed to offer a layer of protection when armour is inserted correctly. They are not designed to prevent injury or death.

Model wearing size 2XL.

The Go-To Street Glove. MotoCAP Top 10. Proven in the Real World.

The 2WA™ ELITE RESPECT Glove is our benchmark street motorcycle glove — already rated in the motoCAP.com.au top 10 and proven in a real high-speed accident without sustaining hand injury. We then went further, improving comfort, design, and safety to make it the best street glove we can offer.

Everything a GP glove has to offer, in a low-cut design that can be worn with any shirt or jacket. Designed for all-round riding in both warmer and colder months, with far more protection than a regular street glove.

Materials & Construction

Constructed from full grain supple cow, goat and kangaroo leather, with a kangaroo leather palm for unmatched grip and durability. The entire glove is lined with 100% genuine DuPont™ Kevlar® Comfort Liner — upper and lower palm — delivering ultimate abrasion resistance and improved comfort. Fingers are reverse stitched for superior comfort and throttle feel. The outer fingers and palm are stitched with genuine 100% DuPont™ Kevlar® thread throughout.

Protection Features

• Full grain cow, goat and kangaroo leather construction
• Fully lined with 100% genuine DuPont™ Kevlar® Fibre Comfort Liner
• Reverse Kevlar® stitched fingers for ultimate comfort and finger feel
• Kevlar® stitched finger bridge to prevent finger roll and finger separation on impact — also aids throttle and lever control
• Kevlar® stitched impact and palm area
• Carbon Kevlar® outer knuckles with increased protection
• Carbon upper and lower finger knuckle protectors
• Embedded protectors in finger knuckles
• Impact absorber on outer thumb and finger
• Kevlar® stitched kangaroo leather palm with impact absorber and impact slider
• Pull-on tab with impact absorber for easier fitting and added wrist protection

Comfort & Airflow

• Perforated fingers and vented TPU knuckles for greater airflow
• Perforated goat leather upper palm, inner thumb and finger — better bar and throttle control, combats hand numbing
• Added accordion panel on the thumb for greater bar comfort and movement
• Super soft high-grade kangaroo leather palm and fingers for greater bar comfort and durability
• Touchscreen compatible fingertips
• Velcro® close tab for quick fitting
• Rubber logo panel

Proven on the Road. Built for the Street.

MotoCAP top 10 rated. Tested in real-world conditions. The 2WA™ ELITE RESPECT Glove is the riding glove you reach for every time — on or off the bike, in any season.

DuPont™ and Kevlar® are trademarks of affiliates of DuPont de Nemours, Inc.

All 2WA™ products are designed to the highest standard using only 100% genuine certified materials including DuPont™ Kevlar®, SoftShell®, CE Certified Armour, YKK®, Velcro® and materials of the highest quality. Our products are designed to offer a layer of protection when armour is inserted correctly. They are not designed to prevent injury or death.