2WA™ ELITE GLOVES

In our quest to bring the Highest Quality Best Protecting Products we can to the Street Bike Community. We have taken the 2WA RESPECT Glove and redesigned it with focus on Greater Quality, Materials, Strength, Comfort and Protection.

After already rating in the top 10 Gloves on motoCAP.com.au and being put to the test in a high-speed accident. We decided that although this glove was perfect in protecting the hands from sustaining any injury. We believe we could make improvements in comfort, design and safety, to make it the best Street Glove we can Offer! 

Designed as an all-round glove for both the warmer and colder months, and a lot more protection in mind then a regular street glove! 

The 2WA™ ELITE RESPECT Glove is our go to glove! With everything a GP glove has to offer and more, but in a low-cut design that can be worn with any shirt or jacket. 

Constructed from a full grain supple and durable cow and goat leather with a kangaroo leather palm. The whole glove is lined with 100% Genuine DuPont™ Kevlar® Comfort Liner both on the upper and lower palm, giving you Ultimate Abrasion Resistance and Improved Comfort, with the adding of extra padded liners in the palm and under knuckle protectors.

The fingers are reverse stitched which gives a much higher comfort level and ultimate finger feel on the controls. We added a finger bridge on the outer fingers to prevent finger roll and finger separation on impacts. This also aids in better throttle and lever control. The outer edge, fingers and palm of our Respect Glove have been stitched with Genuine 100% DuPont™ Kevlar® thread.

The inner fingers are perforated to allow airflow and the inner TPU knuckles are vented to provide airflow to the upper areas of the glove. Kevlar® backed carbon fibre outer knuckles. Embedded protectors in finger knuckles. With added extra protection to the impact zone of the palm area, stitched with Kevlar® and extra layer of kangaroo leather, impact slider and absorber. Giving you ultimate protection.

Both the outer finger and thumb have impact absorbers with pull on tab to protect the inner wrist. The upper palm, inner finger and thumb have an extra layer of perforated goat leather which not only gives you amazing throttle and bar grip but provides extra cushioning on the bars to help combat hand numbing. 

•  Full Grain Cow, Goat and Kangaroo Leather

•  Fully lined with 100% Genuine DuPont™ Kevlar® Fibre Comfort Liner

•  Reverse Kevlar® Stitched fingers for Ultimate Comfort and Finger Feel

•  Kevlar® Stitched Finger Bridge to Prevent Finger Roll

•  Kevlar® Stitched Impact & Palm Area 

•  Perforated Fingers & Vented TPU Knuckles for Greater Airflow

•  Carbon Kevlar® Outer Knuckles & Increased Protection

•  Carbon Upper & Lower Finger Knuckle Protectors

•  Pull On Tab with Impact Absorber for easier fitting and added wrist protection

•  Kevlar® Stitched Kangaroo Leather Palm with Impact Absorber

•  Impact Absorber on Outer Thumb & Finger

•  Perforated Goat Leather Upper Palm, Inner Thumb & Finger. Provides Better Bar & Throttle Control & Combats Numbing Hands

•  Rubber Logo Panel 

•  Velcro® Close Tab for Quick Fitting

• Top Rated motoCAP.com.au Street Glove

• Added accordion panel on the thumb for greater bar comfort & movement

• Super soft high grade kangaroo leather palm and fingers for greater bar comfort and durability

In our quest to bring the Highest Quality Best Protecting Products we can to the Street Bike Community. We have taken the Original 2WA™ RESPECT Glove and redesigned it with the Same Focus on Greater Quality, Materials, Strength, Comfort and Protection. In a new All Black STEALTH Design.

After already rating in the top 10 Gloves on motoCAP.com.au and being put to the test in a high-speed accident. We decided that although this glove was perfect in protecting the hands from sustaining any injury. We believe we could make improvements in comfort, design, function and safety, to make it the best Street Glove we can Offer! 

Designed as an all-round glove for both the warmer and colder months, and a lot more protection in mind then a regular street glove! 

The 2WA™ ELITE STEALTH Glove is our go to, all dark street glove! With everything a GP Glove has to offer and more, but in a Low-Cut, Stealth Black Design that can be worn with any shirt or jacket. 

Constructed from a full grain supple and durable cow and goat leather with a kangaroo leather palm. The whole glove is lined with 100% Genuine DuPont™ Kevlar® Comfort Liner both on the upper and lower palm, giving you Ultimate Abrasion Resistance and Improved Comfort, with the adding of extra padded liners on the palm and underneath knuckle protectors. The fingers are reverse stitched which gives a much higher comfort level and ultimate finger feel on the controls. 

Although on the STEALTH Glove we have removed the finger bridge on the outer fingers to give a greater freedom of movement. We have kept the Impact Absorber, and Extra Layer of Genuine Leather from the Bridge used on the RESPECT Glove, giving a greater layer of protection on the outer fingers. The outer edge, fingers and palm of our Respect Glove have been stitched with Genuine 100% DuPont™ Kevlar® thread.

The inner fingers are perforated to allow airflow and the inner TPU knuckles are vented to provide airflow to the upper areas of the glove. Kevlar® backed carbon fibre outer knuckles. Embedded protectors in finger knuckles. Added protection to the impact zone of the palm area, stitched with Kevlar® and extra layer of kangaroo leather, impact sliders and absorbers. Giving you ultimate protection.

Both the outer finger and thumb have impact absorbers with pull on tab to protect the inner wrist. The upper palm, inner finger and thumb have an extra layer of perforated goat leather which not only gives you amazing throttle and bar grip but provides extra cushioning on the bars to help combat hand numbing. 

•  Full Grain Cow, Goat and Kangaroo Leather

•  Fully lined with 100% Genuine DuPont™ Kevlar® Fibre Comfort Liner

•  Reverse Kevlar® Stitched fingers for Ultimate Comfort and Finger Feel

•  Kevlar® Stitched Outer Fingers incorporating Finger Bridge Protection

•  Kevlar® Stitched Impact & Palm Area 

•  Perforated Fingers & Vented TPU Knuckles for Greater Airflow

•  Carbon Kevlar® Outer Knuckles & Increased Protection

•  Carbon Upper & Lower Finger Knuckle Protectors

•  Pull On Tab with Impact Absorber for easier fitting and added wrist protection

•  Kevlar® Stitched Kangaroo Leather Palm with Impact Absorber

•  Impact Absorber on Outer Thumb & Finger

•  Perforated Goat Leather Upper Palm, Inner Thumb & Finger. Provides Better Bar & Throttle Control & Combats Numbing Hands

•  Rubber Logo Panel 

•  Velcro® Close Tab for Quick Fitting

• Top Rated motoCAP.com.au Street Glove

• Added accordion panel on the thumb for greater bar comfort & movement

• Super soft high grade kangaroo leather palm and fingers for greater bar comfort and durability

In our quest to bring the Highest Quality Best Protecting Products we can to the Street Bike Community. We have taken the Original 2WA™ RESPECT Glove design and redesigned it with a New Focus on Greater Quality, Materials, Strength & Comfort for Wet & Cold Weather Protection. In a new All Black/Gold STEALTH DryTek Design.

With an all-new material construction consisting of 100% Genuine Leather, softSHELL®, Suede AMARA® Super Fabric, THINSULATE® & cutting edge HIPORA® to create the dryest, warmest and most comfortable gloves we have created so far!

The 2WA™ STEALTH DryTek Glove is our go to glove for both Wet and Cold Weather Protection in a Low-Cut, Stealth Black Design that can be worn with any shirt or jacket. 

Constructed from a full grain supple and durable Leather, Suede Amara and softSHELL® material outer as your first defence against the wet and cold weather.

The whole glove is lined with 100% Genuine HIPORA® 3-layer membrane. A cutting-edge material with a microporous, honeycomb structure and polyurethane coating that prevents water from coming in while letting moisture out, and microscopic aluminium flakes to enhance heat retention. The technology of HIPORA® Material meets OSHA Bloodborne Pathogens Standard (29CFR 1910.1030). The whole glove is again then lined with 3M THINSULATE® extremely fine comfort liner microfibres that trap the air and blocks any radiant heat loss. 

We have removed the finger bridge on the outer fingers to give a greater freedom of movement. With the added thickness and softSHELL® finger material construction of this glove we have changed the fingers to internal stitching for greater comfort and control feel. We have kept the Impact Absorber, and Extra Layer of Genuine Leather from the Bridge used on the RESPECT Glove, giving a greater layer of protection on the outer fingers. The outer edge, fingers and palm of our STEALTH DryTek Glove are stitched with Genuine 100% DuPont™ Kevlar® thread.

The inner TPU knuckles are vented to provide a cooling airflow to the upper areas of the glove whilst remaining waterproof. Kevlar® backed carbon fibre outer knuckles. Embedded protectors in finger knuckles. Added protection to the impact zone of the palm area, stitched with Kevlar® and extra layer of kangaroo leather, impact sliders and absorbers. Giving you greater protection in a wet and cold weather glove.

Both the outer finger and thumb have impact absorbers with pull on tab to protect the inner wrist. The upper palm, inner finger and thumb have an extra layer of suede leather with honeycomb grip for enhanced throttle and bar grip providing extra cushioning on the bars to help combat hand numbing. With added finger and thumb touch screen compatibility.

•  Genuine 100% Leather, softSHELL®, Suede AMARA Super Fabric Construction.

•  Fully lined with 100% Genuine HIPORA® and THINSULATE® waterproof comfort liners.

•  Kevlar® Stitched fingers for Ultimate Burst Strength and Finger Feel.

•  Kevlar® Stitched Outer Fingers incorporating Finger Bridge Protection.

•  Kevlar® Stitched Impact & Palm Area. 

•  Vented Outer TPU Knuckles for Greater Airflow.

•  Carbon Kevlar® Outer Knuckles for Increased Protection.

•  Carbon Upper & Lower Finger Knuckle Protectors.

•  Pull On Tab with Impact Absorber for easier fitting and added wrist protection.

•  Kevlar® Stitched softSHELL® and Leather Palm with Impact Absorber.

•  Impact Absorber on Outer Thumb & Finger

•  Suede Leather Upper Palm, Inner Thumb & Finger with Honeycomb Grip Provides Better Bar & Throttle Control & Combats Numbing Hands.

• Touch Screen Compatible Finger and Thumb.

•  Rubber Logo Panel 

•  Velcro® Close Tab for Quick Fitting
  

• Added accordion panel on the thumb and fingers for greater bar comfort & finger movement

• Super soft high grade AMARA Super Fabric palm and inner fingers for greater bar comfort and durability

In our quest to bring the Highest Quality Best Protecting Products we can to the Street Bike Community. We have taken the original 2WA™ RESPECT Glove and redesigned it with focus on Greater Quality, Materials, Strength, Comfort and Protection. Now Available in colour options!

After already rating in the top 10 Gloves on motoCAP.com.au and being put to the test in a high-speed accident. We decided that although this glove was perfect in protecting the hands from sustaining any injury. We believe we could make improvements in comfort, design and safety, to make it the best Street Glove we can Offer! Using the exact same glove and construction with added colour options!

Designed as an all-round glove for both the warmer and colder months, and a lot more protection in mind then a regular street glove! 

The 2WA™ ELITE RESPECT Glove is our go to glove! With everything a GP glove has to offer and more, but in a low-cut design that can be worn with any shirt or jacket. 

Constructed from a full grain supple and durable cow and goat leather with a kangaroo leather palm. The whole glove is lined with 100% Genuine DuPont™ Kevlar® Comfort Liner both on the upper and lower palm, giving you Ultimate Abrasion Resistance and Improved Comfort, with the adding of extra padded liners in the palm and under knuckle protectors. The fingers are reverse stitched which gives a much higher comfort level and ultimate finger feel on the controls. We added a finger bridge on the outer fingers to prevent finger roll and finger separation on impacts. This also aids in better throttle and lever control. The outer edge, fingers and palm of our Respect Glove have been stitched with Genuine 100% DuPont™ Kevlar® thread.

The inner fingers are perforated to allow airflow and the inner TPU knuckles are vented to provide airflow to the upper areas of the glove. Kevlar® backed carbon fibre outer knuckles. Embedded protectors in finger knuckles. With added extra protection to the impact zone of the palm area, stitched with Kevlar® and extra layer of kangaroo leather, impact slider and absorber. Giving you ultimate protection.

Both the outer finger and thumb have impact absorbers with pull on tab to protect the inner wrist. The upper palm, inner finger and thumb have an extra layer of perforated goat leather which not only gives you amazing throttle and bar grip but provides extra cushioning on the bars to help combat hand numbing. 

•  Full Grain Cow, Goat and Kangaroo Leather

•  Fully lined with 100% Genuine DuPont™ Kevlar® Fibre Comfort Liner

•  Reverse Kevlar® Stitched fingers for Ultimate Comfort and Finger Feel

•  Kevlar® Stitched Finger Bridge to Prevent Finger Roll

•  Kevlar® Stitched Impact & Palm Area 

•  Perforated Fingers & Vented TPU Knuckles for Greater Airflow

•  Carbon Kevlar® Outer Knuckles & Increased Protection

•  Carbon Upper & Lower Finger Knuckle Protectors

•  Pull On Tab with Impact Absorber for easier fitting and added wrist protection

•  Kevlar® Stitched Kangaroo Leather Palm with Impact Absorber

•  Impact Absorber on Outer Thumb & Finger

•  Perforated Goat Leather Upper Palm, Inner Thumb & Finger. Provides Better Bar & Throttle Control & Combats Numbing Hands

•  Rubber Logo Panel 

•  Velcro® Close Tab for Quick Fitting

• Top Rated motoCAP.com.au Street Glove

• Added accordion panel on the thumb for greater bar comfort & movement

• Super soft high grade kangaroo leather palm and fingers for greater bar comfort and durability

In our quest to bring the Highest Quality Best Protecting Products we can to the Street Bike Community. We have taken the original 2WA™ RESPECT Glove and redesigned it with focus on Greater Quality, Materials, Strength, Comfort and Protection. Now Available in colour options!

After already rating in the top 10 Gloves on motoCAP.com.au and being put to the test in a high-speed accident. We decided that although this glove was perfect in protecting the hands from sustaining any injury. We believe we could make improvements in comfort, design and safety, to make it the best Street Glove we can Offer! Using the exact same glove and construction with added colour options!

Designed as an all-round glove for both the warmer and colder months, and a lot more protection in mind then a regular street glove! 

The 2WA™ ELITE RESPECT Glove is our go to glove! With everything a GP glove has to offer and more, but in a low-cut design that can be worn with any shirt or jacket. 

Constructed from a full grain supple and durable cow and goat leather with a kangaroo leather palm. The whole glove is lined with 100% Genuine DuPont™ Kevlar® Comfort Liner both on the upper and lower palm, giving you Ultimate Abrasion Resistance and Improved Comfort, with the adding of extra padded liners in the palm and under knuckle protectors. The fingers are reverse stitched which gives a much higher comfort level and ultimate finger feel on the controls. We added a finger bridge on the outer fingers to prevent finger roll and finger separation on impacts. This also aids in better throttle and lever control. The outer edge, fingers and palm of our Respect Glove have been stitched with Genuine 100% DuPont™ Kevlar® thread.

The inner fingers are perforated to allow airflow and the inner TPU knuckles are vented to provide airflow to the upper areas of the glove. Kevlar® backed carbon fibre outer knuckles. Embedded protectors in finger knuckles. With added extra protection to the impact zone of the palm area, stitched with Kevlar® and extra layer of kangaroo leather, impact slider and absorber. Giving you ultimate protection.

Both the outer finger and thumb have impact absorbers with pull on tab to protect the inner wrist. The upper palm, inner finger and thumb have an extra layer of perforated goat leather which not only gives you amazing throttle and bar grip but provides extra cushioning on the bars to help combat hand numbing. 

•  Full Grain Cow, Goat and Kangaroo Leather

•  Fully lined with 100% Genuine DuPont™ Kevlar® Fibre Comfort Liner

•  Reverse Kevlar® Stitched fingers for Ultimate Comfort and Finger Feel

•  Kevlar® Stitched Finger Bridge to Prevent Finger Roll

•  Kevlar® Stitched Impact & Palm Area 

•  Perforated Fingers & Vented TPU Knuckles for Greater Airflow

•  Carbon Kevlar® Outer Knuckles & Increased Protection

•  Carbon Upper & Lower Finger Knuckle Protectors

•  Pull On Tab with Impact Absorber for easier fitting and added wrist protection

•  Kevlar® Stitched Kangaroo Leather Palm with Impact Absorber

•  Impact Absorber on Outer Thumb & Finger

•  Perforated Goat Leather Upper Palm, Inner Thumb & Finger. Provides Better Bar & Throttle Control & Combats Numbing Hands

• Touch Screen Compatible Finger and Thumb

•  Rubber Logo Panel 

•  Velcro® Close Tab for Quick Fitting

• Top Rated motoCAP.com.au Street Glove

• Added accordion panel on the thumb and fingers for greater bar comfort & movement

• Super soft high grade kangaroo leather palm and fingers for greater bar comfort and durability