2WA™ ELITE ARMOURED HOODIES

Last Chance — Discontinued to Make Way for Our New '26 OFFICIAL Design.

The 2WA™ ELITE Level II Armoured LIGHT V DARK OFFICIAL 210 Scoop Cut Pullover Hoodie is being cleared as we make way for our all-new 2026 OFFICIAL Light V Dark design. The Scoop Cut Pullover silhouette — same protection-grade build, same genuine materials, same 460GSM heavy fleece — now at a significantly reduced price. Stock is limited across sizes. Once they’re gone, this design is gone for good.

Protection You Can Feel Confident In

• Removable & adjustable 2WA™ Level II Low-Profile Viscoelastic CE Approved Elbow/Forearm, Shoulder and Back Armour — soft and body-forming until impact, then superior shock absorption kicks in.

• 220GSM 100% Genuine DuPont™ Kevlar® knitted weave lining throughout the entire hoodie — not just high-risk areas. We don’t use cheaper blended Kevlar® materials that can cause abrasion burns, shrink, or reduce breathability over time.

• 2WA™ Custom Raglan RyderSleeves — our custom sleeve design creates a stronger shoulder area with less stitching and higher burst strength to better protect from impacts in a slide.

Built Different

• 460GSM in-house manufactured heavy fleece outer — one of the toughest fleece hoodies on the market. Triple-layered for warmth and breathability, making it a great mid-to-cold weather riding jacket.

• 2WA™ Thumbed RyderCuffs — specially designed for greater coverage and comfort in riding position, keeping sleeves in place and cold air out.

• 2WA™ RyderHood — double-lined inside and out to cushion around the back of the helmet and block wind effectively.

• 2WA™ Straight Cut RyderBak — designed for that urban street look with rider fit and comfort in mind.

• 2WA™ RyderLoop to attach to your 2WA™ joggers or jeans and keep everything in place on the bike.

• High-quality superfine 100% poly mesh liner for comfort and airflow between rider and hoodie.

• All embroidered 2WA™ logos for long-lasting style that won’t fade or peel.

Other brands charge extra for CE protectors or skimp on Kevlar®, only lining high-risk areas without disclosing grades. We use full 100% genuine 220GSM–260GSM DuPont™ Kevlar® weave and include CE Level II armour in every 2WA™ product — at no extra cost.

DuPont™ and Kevlar® are trademarks of affiliates of DuPont de Nemours, Inc.

All 2WA™ products are designed to the highest standard using only 100% genuine certified materials including DuPont™ Kevlar®, CE Certified Armour, YKK®, and Velcro®. Our products are designed to offer a layer of protection when armour is inserted correctly. They are not designed to prevent injury or death.

Model wearing size XS.

Last Chance — Discontinued to Make Way for Our New '26 OFFICIAL STEALTH Design.

The 2WA™ ELITE Level II Armoured Black OFFICIAL 210 STEALTH Pullover Hoodie is being cleared as we make way for our all-new 2026 OFFICIAL STEALTH design. The all-black OFFICIAL colourway with tonal black-on-black embroidery — same protection-grade build, same genuine materials, same 460GSM heavy fleece — now at a significantly reduced price. Stock is limited. Once they’re gone, this design is gone for good.

Protection You Can Feel Confident In

• Removable & adjustable 2WA™ Level II Low-Profile Viscoelastic CE Approved Elbow/Forearm, Shoulder and Back Armour — soft and body-forming until impact, then superior shock absorption kicks in.

• 220GSM 100% Genuine DuPont™ Kevlar® knitted weave lining throughout the entire hoodie — not just high-risk areas. We don’t use cheaper blended Kevlar® materials that can cause abrasion burns, shrink, or reduce breathability over time.

• 2WA™ Custom Raglan RyderSleeves — our custom sleeve design creates a stronger shoulder area with less stitching and higher burst strength to better protect from impacts in a slide.

Built Different

• 460GSM in-house manufactured heavy fleece outer — one of the toughest fleece hoodies on the market. Triple-layered for warmth and breathability, making it a great mid-to-cold weather riding jacket.

• 2WA™ Thumbed RyderCuffs — specially designed for greater coverage and comfort in riding position, keeping sleeves in place and cold air out.

• 2WA™ RyderHood — double-lined inside and out to cushion around the back of the helmet and block wind effectively.

• 2WA™ Straight Cut RyderBak — designed for that urban street look with rider fit and comfort in mind.

• 2WA™ RyderLoop to attach to your 2WA™ joggers or jeans and keep everything in place on the bike.

• High-quality superfine 100% poly mesh liner for comfort and airflow between rider and hoodie.

• Tonal black-on-black embroidered 2WA™ logos — subtle, sleek, and built to last.

Other brands charge extra for CE protectors or skimp on Kevlar®, only lining high-risk areas without disclosing grades. We use full 100% genuine 220GSM–260GSM DuPont™ Kevlar® weave and include CE Level II armour in every 2WA™ product — at no extra cost.

DuPont™ and Kevlar® are trademarks of affiliates of DuPont de Nemours, Inc.

All 2WA™ products are designed to the highest standard using only 100% genuine certified materials including DuPont™ Kevlar®, CE Certified Armour, YKK®, and Velcro®. Our products are designed to offer a layer of protection when armour is inserted correctly. They are not designed to prevent injury or death.

Model wearing size 2XL.

Last Chance — Discontinued to Make Way for Our New '26 OFFICIAL Design.

The 2WA™ ELITE Level II Armoured LIGHT V DARK OFFICIAL V2 Hoodie is being cleared as we make way for our all-new 2026 OFFICIAL Light V Dark design. Same protection-grade build, same genuine materials, same 460GSM heavy fleece — now at a significantly reduced price. Only a handful of sizes remain. Once they’re gone, this design is gone for good.

Protection You Can Feel Confident In

• Removable & adjustable 2WA™ Level II Low-Profile Viscoelastic CE Approved Elbow/Forearm, Shoulder and Back Armour — soft and body-forming until impact, then superior shock absorption kicks in.

• 220GSM 100% Genuine DuPont™ Kevlar® knitted weave lining throughout the entire hoodie — not just high-risk areas. We don’t use cheaper blended Kevlar® materials that can cause abrasion burns, shrink, or reduce breathability over time.

• 2WA™ Custom Raglan RyderSleeves — our custom sleeve design creates a stronger shoulder area with less stitching and higher burst strength to better protect from impacts in a slide.

Built Different

• 460GSM in-house manufactured heavy fleece outer — one of the toughest fleece hoodies on the market. Triple-layered for warmth and breathability, making it a great mid-to-cold weather riding jacket.

• 2WA™ Thumbed RyderCuffs — specially designed for greater coverage and comfort in riding position, keeping sleeves in place and cold air out.

• 2WA™ RyderHood — double-lined inside and out to cushion around the back of the helmet and block wind effectively.

• 2WA™ Straight Cut RyderBak — designed for that urban street look with rider fit and comfort in mind.

• 2WA™ RyderLoop to attach to your 2WA™ joggers or jeans and keep everything in place on the bike.

• High-quality superfine 100% poly mesh liner for comfort and airflow between rider and hoodie.

• All embroidered 2WA™ logos for long-lasting style that won’t fade or peel.

Other brands charge extra for CE protectors or skimp on Kevlar®, only lining high-risk areas without disclosing grades. We use full 100% genuine 220GSM–260GSM DuPont™ Kevlar® weave and include CE Level II armour in every 2WA™ product — at no extra cost.

DuPont™ and Kevlar® are trademarks of affiliates of DuPont de Nemours, Inc.

All 2WA™ products are designed to the highest standard using only 100% genuine certified materials including DuPont™ Kevlar®, CE Certified Armour, YKK®, and Velcro®. Our products are designed to offer a layer of protection when armour is inserted correctly. They are not designed to prevent injury or death.

Last Chance — This Design Has Been Discontinued.

The 2WA™ ELITE Level II Armoured White OFFICIAL V2 Fleece Hoodie is being cleared as we streamline our range. The all-white colourway with contrasting black embroidery — same protection-grade build, same genuine materials, same 460GSM heavy fleece — now at a significantly reduced price. Once the remaining stock is gone, this design will not be restocked.

Protection You Can Feel Confident In

• Removable & adjustable 2WA™ Level II Low-Profile Viscoelastic CE Approved Elbow/Forearm, Shoulder and Back Armour — soft and body-forming until impact, then superior shock absorption kicks in.

• 220GSM 100% Genuine DuPont™ Kevlar® knitted weave lining throughout the entire hoodie — not just high-risk areas. We don’t use cheaper blended Kevlar® materials that can cause abrasion burns, shrink, or reduce breathability over time.

• 2WA™ Custom Raglan RyderSleeves — our custom sleeve design creates a stronger shoulder area with less stitching and higher burst strength to better protect from impacts in a slide.

Built Different

• 460GSM in-house manufactured heavy fleece outer — one of the toughest fleece hoodies on the market. Triple-layered for warmth and breathability, making it a great mid-to-cold weather riding jacket.

• Contrasting black embroidered 2WA™ logos — bold against the white fleece and built to last.

• 2WA™ Thumbed RyderCuffs — specially designed for greater coverage and comfort in riding position, keeping sleeves in place and cold air out.

• 2WA™ RyderHood — double-lined inside and out to cushion around the back of the helmet and block wind effectively.

• 2WA™ Straight Cut RyderBak — designed for that urban street look with rider fit and comfort in mind.

• 2WA™ RyderLoop to attach to your 2WA™ joggers or jeans and keep everything in place on the bike.

• High-quality superfine 100% poly mesh liner for comfort and airflow between rider and hoodie.

Other brands charge extra for CE protectors or skimp on Kevlar®, only lining high-risk areas without disclosing grades. We use full 100% genuine 220GSM–260GSM DuPont™ Kevlar® weave and include CE Level II armour in every 2WA™ product — at no extra cost.

DuPont™ and Kevlar® are trademarks of affiliates of DuPont de Nemours, Inc.

All 2WA™ products are designed to the highest standard using only 100% genuine certified materials including DuPont™ Kevlar®, CE Certified Armour, YKK®, and Velcro®. Our products are designed to offer a layer of protection when armour is inserted correctly. They are not designed to prevent injury or death.

Model wearing size 2XL.

Last Chance — Discontinued to Make Way for Our New Design.

The 2WA™ ELITE Level II Armoured Black OFFICIAL V2 Hoodie is being cleared as we make way for our all-new design. A full-zip hoodie with bold all-over white embroidery — featuring the iconic 210 “TWO WHEELS AND ZERO PROBLEMS” back design, multi-graphic sleeve branding, and TWA chest logo — same protection-grade build, same genuine materials, same 460GSM heavy fleece, now at a significantly reduced price. Once the remaining stock is gone, this design is gone for good.

Protection You Can Feel Confident In

• Removable & adjustable 2WA™ Level II Low-Profile Viscoelastic CE Approved Elbow/Forearm, Shoulder and Back Armour — soft and body-forming until impact, then superior shock absorption kicks in.

• 220GSM 100% Genuine DuPont™ Kevlar® knitted weave lining throughout the entire hoodie — not just high-risk areas. We don’t use cheaper blended Kevlar® materials that can cause abrasion burns, shrink, or reduce breathability over time.

• 2WA™ Custom Raglan RyderSleeves — our custom sleeve design creates a stronger shoulder area with less stitching and higher burst strength to better protect from impacts in a slide.

Built Different

• Full-zip construction — easy on and off over riding gear, with a clean zip placket finish.

• Bold all-over white embroidery — 210 “TWO WHEELS AND ZERO PROBLEMS” back design, multi-graphic sleeve branding including 2WA, //W, and 2WHEELAPPEAL, plus TWA chest logo.

• 460GSM in-house manufactured heavy fleece outer — one of the toughest fleece hoodies on the market. Triple-layered for warmth and breathability.

• 2WA™ Thumbed RyderCuffs — specially designed for greater coverage and comfort in riding position, keeping sleeves in place and cold air out.

• 2WA™ RyderHood — double-lined inside and out to cushion around the back of the helmet and block wind effectively.

• 2WA™ Straight Cut RyderBak — designed for that urban street look with rider fit and comfort in mind.

• 2WA™ RyderLoop to attach to your 2WA™ joggers or jeans and keep everything in place on the bike.

• High-quality superfine 100% poly mesh liner for comfort and airflow between rider and hoodie.

Other brands charge extra for CE protectors or skimp on Kevlar®, only lining high-risk areas without disclosing grades. We use full 100% genuine 220GSM–260GSM DuPont™ Kevlar® weave and include CE Level II armour in every 2WA™ product — at no extra cost.

DuPont™ and Kevlar® are trademarks of affiliates of DuPont de Nemours, Inc.

All 2WA™ products are designed to the highest standard using only 100% genuine certified materials including DuPont™ Kevlar®, CE Certified Armour, YKK®, and Velcro®. Our products are designed to offer a layer of protection when armour is inserted correctly. They are not designed to prevent injury or death.

Protection-Grade Quality. Street-Ready Style.

The 2WA™ ELITE Level II Armoured LIGHT V DARK CLASSIC Hoodie is built for riders who want maximum protection without sacrificing the look and feel of a premium streetwear hoodie. The Light V Dark colourway brings bold contrast styling to our heaviest, most protective fleece hoodie — weighing just over 2kg with armour inserted, built with our in-house manufactured 460GSM heavy fleece outer and full DuPont™ Kevlar® lining throughout.

We believe every rider deserves to know exactly what they’re buying. That’s why we list every material type, thickness, and GSM specification — so you ride with confidence, not guesswork.

Protection You Can Feel Confident In

• Removable & adjustable 2WA™ Level II Low-Profile Viscoelastic CE Approved Elbow/Forearm, Shoulder and Back Armour — soft and body-forming until impact, then superior shock absorption kicks in.

• 220GSM 100% Genuine DuPont™ Kevlar® knitted weave lining throughout the entire hoodie — not just high-risk areas. We don’t use cheaper blended Kevlar® materials that can cause abrasion burns, shrink, or reduce breathability over time.

• 2WA™ Custom Raglan RyderSleeves — our custom sleeve design creates a stronger shoulder area with less stitching and higher burst strength to better protect from impacts in a slide.

Built Different

• 460GSM in-house manufactured heavy fleece outer — one of the toughest fleece hoodies on the market. Triple-layered for warmth and breathability, making it a great mid-to-cold weather riding jacket.

• 2WA™ Thumbed RyderCuffs — specially designed for greater coverage and comfort in riding position, keeping sleeves in place and cold air out.

• 2WA™ RyderHood — double-lined inside and out to cushion around the back of the helmet and block wind effectively.

• 2WA™ Straight Cut RyderBak — designed for that urban street look with rider fit and comfort in mind.

• 2WA™ RyderLoop to attach to your 2WA™ joggers or jeans and keep everything in place on the bike.

• High-quality superfine 100% poly mesh liner for comfort and airflow between rider and hoodie.

• All embroidered 2WA™ logos for long-lasting style that won’t fade or peel.

Other brands charge extra for CE protectors or skimp on Kevlar®, only lining high-risk areas without disclosing grades. We use full 100% genuine 220GSM–260GSM DuPont™ Kevlar® weave and include CE Level II armour in every 2WA™ product — at no extra cost.

DuPont™ and Kevlar® are trademarks of affiliates of DuPont de Nemours, Inc.

All 2WA™ products are designed to the highest standard using only 100% genuine certified materials including DuPont™ Kevlar®, CE Certified Armour, YKK®, and Velcro®. Our products are designed to offer a layer of protection when armour is inserted correctly. They are not designed to prevent injury or death.

Model wearing size XL.

All Black. Full Protection. Nobody Needs to Know.

The 2WA™ ELITE Level II Armoured Black STEALTH Fleece Hoodie is our definitive all-black colourway — clean, understated, and built to protect. With our in-house manufactured 460GSM heavy fleece outer and full DuPont™ Kevlar® lining throughout, it’s the hoodie that looks like streetwear and performs like armour. Weighing just over 2kg with armour inserted, this is the heaviest, most protective fleece hoodie we make.

We believe every rider deserves to know exactly what they’re buying. That’s why we list every material type, thickness, and GSM specification — so you ride with confidence, not guesswork.

Protection You Can Feel Confident In

• Removable & adjustable 2WA™ Level II Low-Profile Viscoelastic CE Approved Elbow/Forearm, Shoulder and Back Armour — soft and body-forming until impact, then superior shock absorption kicks in.

• 220GSM 100% Genuine DuPont™ Kevlar® knitted weave lining throughout the entire hoodie — not just high-risk areas. We don’t use cheaper blended Kevlar® materials that can cause abrasion burns, shrink, or reduce breathability over time.

• 2WA™ Custom Raglan RyderSleeves — our custom sleeve design creates a stronger shoulder area with less stitching and higher burst strength to better protect from impacts in a slide.

Built Different

• 460GSM in-house manufactured heavy fleece outer — one of the toughest fleece hoodies on the market. Triple-layered for warmth and breathability, making it a great mid-to-cold weather riding jacket.

• 2WA™ Thumbed RyderCuffs — specially designed for greater coverage and comfort in riding position, keeping sleeves in place and cold air out.

• 2WA™ RyderHood — double-lined inside and out to cushion around the back of the helmet and block wind effectively.

• 2WA™ Straight Cut RyderBak — designed for that urban street look with rider fit and comfort in mind.

• 2WA™ RyderLoop to attach to your 2WA™ joggers or jeans and keep everything in place on the bike.

• High-quality superfine 100% poly mesh liner for comfort and airflow between rider and hoodie.

• All embroidered 2WA™ logos for long-lasting style that won’t fade or peel.

Other brands charge extra for CE protectors or skimp on Kevlar®, only lining high-risk areas without disclosing grades. We use full 100% genuine 220GSM–260GSM DuPont™ Kevlar® weave and include CE Level II armour in every 2WA™ product — at no extra cost.

DuPont™ and Kevlar® are trademarks of affiliates of DuPont de Nemours, Inc.

All 2WA™ products are designed to the highest standard using only 100% genuine certified materials including DuPont™ Kevlar®, CE Certified Armour, YKK®, and Velcro®. Our products are designed to offer a layer of protection when armour is inserted correctly. They are not designed to prevent injury or death.

Protection-Grade Quality. Street-Ready Style.

The 2WA™ ELITE Level II Armoured Black CLASSIC Hoodie is built for riders who want maximum protection without sacrificing the look and feel of a premium streetwear hoodie. The all-black colourway with luminescent silver embroidery — featuring our trademarked 2WA™ Classic Logo on the back, sleeve branding, and “LIVE IT. LOVE IT. RIDE IT.” hem text — makes this one of the most striking hoodies in the range. With our in-house manufactured 460GSM heavy fleece outer and full DuPont™ Kevlar® lining throughout, it weighs just over 2kg with armour inserted and is one of the heaviest, most protective fleece hoodies on the market.

We believe every rider deserves to know exactly what they’re buying. That’s why we list every material type, thickness, and GSM specification — so you ride with confidence, not guesswork.

Protection You Can Feel Confident In

• Removable & adjustable 2WA™ Level II Low-Profile Viscoelastic CE Approved Elbow/Forearm, Shoulder and Back Armour — soft and body-forming until impact, then superior shock absorption kicks in.

• 220GSM 100% Genuine DuPont™ Kevlar® knitted weave lining throughout the entire hoodie — not just high-risk areas. We don’t use cheaper blended Kevlar® materials that can cause abrasion burns, shrink, or reduce breathability over time.

• 2WA™ Custom Raglan RyderSleeves — our custom sleeve design creates a stronger shoulder area with less stitching and higher burst strength to better protect from impacts in a slide.

Built Different

• Luminescent silver embroidery — our trademarked 2WA™ Classic Logo on the back, sleeve branding, and “LIVE IT. LOVE IT. RIDE IT.” hem text. Striking on black and built to last.

• 460GSM in-house manufactured heavy fleece outer — one of the toughest fleece hoodies on the market. Triple-layered for warmth and breathability, making it a great mid-to-cold weather riding jacket.

• 2WA™ Thumbed RyderCuffs — specially designed for greater coverage and comfort in riding position, keeping sleeves in place and cold air out.

• 2WA™ RyderHood — double-lined inside and out to cushion around the back of the helmet and block wind effectively.

• 2WA™ Straight Cut RyderBak — designed for that urban street look with rider fit and comfort in mind.

• 2WA™ RyderLoop to attach to your 2WA™ joggers or jeans and keep everything in place on the bike.

• High-quality superfine 100% poly mesh liner for comfort and airflow between rider and hoodie.

Other brands charge extra for CE protectors or skimp on Kevlar®, only lining high-risk areas without disclosing grades. We use full 100% genuine 220GSM–260GSM DuPont™ Kevlar® weave and include CE Level II armour in every 2WA™ product — at no extra cost.

DuPont™ and Kevlar® are trademarks of affiliates of DuPont de Nemours, Inc.

All 2WA™ products are designed to the highest standard using only 100% genuine certified materials including DuPont™ Kevlar®, CE Certified Armour, YKK®, and Velcro®. Our products are designed to offer a layer of protection when armour is inserted correctly. They are not designed to prevent injury or death.

Protection-Grade Quality. Street-Ready Style. Made for Everyone.

The 2WA™ ELITE Level II Armoured White CLASSIC Fleece Hoodie is built for riders who want maximum protection without sacrificing the look and feel of a premium streetwear hoodie. The White CLASSIC colourway is clean, versatile, and truly unisex — designed to look and fit great on every body. Finished with luminescent silver embroidery, it’s the current edition of this design before the all-new ‘26 model arrives with silver and gold. With our in-house manufactured 460GSM heavy fleece outer and full DuPont™ Kevlar® lining throughout, it weighs just over 2kg with armour inserted and is one of the heaviest, most protective fleece hoodies on the market.

We believe every rider deserves to know exactly what they’re buying. That’s why we list every material type, thickness, and GSM specification — so you ride with confidence, not guesswork.

Protection You Can Feel Confident In

• Removable & adjustable 2WA™ Level II Low-Profile Viscoelastic CE Approved Elbow/Forearm, Shoulder and Back Armour — soft and body-forming until impact, then superior shock absorption kicks in.

• 220GSM 100% Genuine DuPont™ Kevlar® knitted weave lining throughout the entire hoodie — not just high-risk areas. We don’t use cheaper blended Kevlar® materials that can cause abrasion burns, shrink, or reduce breathability over time.

• 2WA™ Custom Raglan RyderSleeves — our custom sleeve design creates a stronger shoulder area with less stitching and higher burst strength to better protect from impacts in a slide.

Built Different

• 460GSM in-house manufactured heavy fleece outer — one of the toughest fleece hoodies on the market. Triple-layered for warmth and breathability, making it a great mid-to-cold weather riding jacket.

• Truly unisex fit — designed and sized to look and feel great on all body types. See our product photos for both male and female fit references.

• Luminescent silver embroidered 2WA™ logos — the signature finish of this edition, striking against the white fleece and built to last.

• 2WA™ Thumbed RyderCuffs — specially designed for greater coverage and comfort in riding position, keeping sleeves in place and cold air out.

• 2WA™ RyderHood — double-lined inside and out to cushion around the back of the helmet and block wind effectively.

• 2WA™ Straight Cut RyderBak — designed for that urban street look with rider fit and comfort in mind.

• 2WA™ RyderLoop to attach to your 2WA™ joggers or jeans and keep everything in place on the bike.

• High-quality superfine 100% poly mesh liner for comfort and airflow between rider and hoodie.

Other brands charge extra for CE protectors or skimp on Kevlar®, only lining high-risk areas without disclosing grades. We use full 100% genuine 220GSM–260GSM DuPont™ Kevlar® weave and include CE Level II armour in every 2WA™ product — at no extra cost.

DuPont™ and Kevlar® are trademarks of affiliates of DuPont de Nemours, Inc.

All 2WA™ products are designed to the highest standard using only 100% genuine certified materials including DuPont™ Kevlar®, CE Certified Armour, YKK®, and Velcro®. Our products are designed to offer a layer of protection when armour is inserted correctly. They are not designed to prevent injury or death.

Model wearing size XL.

Last Chance — Discontinued to Make Way for Our New '26 OFFICIAL STEALTH Design.

The 2WA™ ELITE Level II Armoured White OFFICIAL 210 STEALTH Pullover Hoodie is being cleared as we make way for our all-new 2026 OFFICIAL STEALTH design. The all-white OFFICIAL colourway with tonal white-on-white embroidery — same protection-grade build, same genuine materials, same 460GSM heavy fleece — now at a significantly reduced price. Stock is limited. Once they’re gone, this design is gone for good.

Protection You Can Feel Confident In

• Removable & adjustable 2WA™ Level II Low-Profile Viscoelastic CE Approved Elbow/Forearm, Shoulder and Back Armour — soft and body-forming until impact, then superior shock absorption kicks in.

• 220GSM 100% Genuine DuPont™ Kevlar® knitted weave lining throughout the entire hoodie — not just high-risk areas. We don’t use cheaper blended Kevlar® materials that can cause abrasion burns, shrink, or reduce breathability over time.

• 2WA™ Custom Raglan RyderSleeves — our custom sleeve design creates a stronger shoulder area with less stitching and higher burst strength to better protect from impacts in a slide.

Built Different

• 460GSM in-house manufactured heavy fleece outer — one of the toughest fleece hoodies on the market. Triple-layered for warmth and breathability, making it a great mid-to-cold weather riding jacket.

• 2WA™ Thumbed RyderCuffs — specially designed for greater coverage and comfort in riding position, keeping sleeves in place and cold air out.

• 2WA™ RyderHood — double-lined inside and out to cushion around the back of the helmet and block wind effectively.

• 2WA™ Straight Cut RyderBak — designed for that urban street look with rider fit and comfort in mind.

• 2WA™ RyderLoop to attach to your 2WA™ joggers or jeans and keep everything in place on the bike.

• High-quality superfine 100% poly mesh liner for comfort and airflow between rider and hoodie.

• Tonal white-on-white embroidered 2WA™ logos — subtle, clean, and built to last.

Other brands charge extra for CE protectors or skimp on Kevlar®, only lining high-risk areas without disclosing grades. We use full 100% genuine 220GSM–260GSM DuPont™ Kevlar® weave and include CE Level II armour in every 2WA™ product — at no extra cost.

DuPont™ and Kevlar® are trademarks of affiliates of DuPont de Nemours, Inc.

All 2WA™ products are designed to the highest standard using only 100% genuine certified materials including DuPont™ Kevlar®, CE Certified Armour, YKK®, and Velcro®. Our products are designed to offer a layer of protection when armour is inserted correctly. They are not designed to prevent injury or death.

Model wearing size 2XL.