2WA™ 210 Graffiti Street TEE

The Full Brand. On Your Back.

The 2WA™ OFFICIAL Pullover Hoodie carries the entire Two Wheel Appeal universe in one piece. Every major mark. Every chapter of the journey — stacked down the back, stitched into both sleeves, and wrapped around the hood.

This isn't a hoodie with a bunch of random logos on it. This is the archive. The story and the journey.

Live it. Love it. Ride it. ™

The Design

Some pieces make one statement. The OFFICIAL makes them all.

We didn't set out to put every 2WA mark we have ever designed on a single garment for the sake of it. The OFFICIAL exists because after nearly a decade of building logos, marks, and cultural touchstones around the two-wheel community, there needed to be one piece that carried that journey — the next generation of where we've been, where we are headed, and what we still stand for.

Nothing wasted. Everything earned.

The Back

The upper back opens with the woven TWOWHEELAPPEAL heritage patch — Live It. Love It. Ride It.™ Protective Streetwear. EST. 2017. The philosophy, the name and the birth that started it all, before the logos, before the range.

Below it, the full 2WA™ logo stack runs the length of the back in order:

• The 2WA CLASSIC™ Crest — the original premium mark
• The RESPECT — two fingers down, the rider's code, a mark of respect, we see you
• The TWA 210 Crest — the mark, badge and our seal of quality and approval
• ATTITUDE! — because that's what this life demands
• The feeling 210 at the hem — closing the stack

Every mark carries its own story and journey.

The Hood

Wrap the hood and you find the feeling: 2 WHEELS. 1 MIND. 0 PROBLEMS. ™ in white with silver, deliberately reversed during construction so it forms part of the rear design. The philosophy that every rider understands. It's not the destination, it's the feeling, it's the journey.

The Sleeves

The left sleeve carries the new generation — the next-era 210 logo stacked with the 2WA Signature logo and EST. 2017 script. The beginning and the evolution, side by side.

The right sleeve carries the foundation — the 2WA CLASSIC Crest, the TWA 210 Stamp of approval, and the TWA Signature logo, anchored by the 2WA patch. The original marks. The ones that built the brand.

Read both sleeves together and you have the whole story.

The Front

The 2WA RESPECT, TWOWHEELAPPEAL, and LIVE IT LOVE IT RIDE IT™ form together in white and silver across the chest, something we have lived by since 2017. Respect, Life, Love and the Ride.

Front images uploading shortly.

Crafted Without Compromise

BUILT THE 2WA WAY

Every logo on this hoodie was earned over nearly a decade of protecting riders. The OFFICIAL is built to the same standard as what it carries.

Built from the ground up using the same 465GSM heavyweight fleece as our ELITE Level II Ryder Hoodies — the same protection-grade thickness, same double stitched construction trusted by riders for nearly a decade.

No blanks, no white label products with a logo slapped on them. Built by the same team that's been protecting riders for nearly a decade.

2WA Quality — Without the Armour!

• 465GSM Premium Heavyweight Fleece — warmth, structure and durability built far beyond ordinary fast fashion weight
• Full 2WA™ Archive Logo Stack — CLASSIC Crest, RESPECT, TWA 210 Stamp, ATTITUDE!, 210 closing  the stack — the entire brand, in order
• Heritage TWOWHEELAPPEAL Woven Patch — EST. 2017, where it all began
• Dual Sleeve Story — some of our new generation left, original marks right
• Hood Rim logo — shares the feeling 2 WHEELS. 1 MIND. 0 PROBLEMS.™ tying the bottom to the top
• Raglan Sleeve Drop Shoulder — street-ready cut built for all-day comfort and confident presence
  
• Double-Layered Cordless Hood — Structured high-neck hood, warm, and clean — no dangling cords
• All Embroidered Logos — every mark, patch and outline stitched in, no printed shortcuts, made to last
• Reinforced Double-Stitched Construction — the same build standard as our entire ELITE Armoured range
• All 2WA™ Own Tags — fully branded, no white-label shortcuts, built by us from the ground up
• Extended thumb-through streetwear glove cuffs to keep hands warmer
• Large kangaroo front pocket
• Custom 2WA woven garment detailing
  

The Right Fit

The OFFICIAL Pullover is designed to fit true to our sizing — if you wear a 2XL in our ELITE Protective Hoodies, you're a 2XL here. Same sizing, same fit confidence. If you're between sizes or prefer a relaxed drape, size up.

Streetwear Hoodie Size Guide

Chest and waist figures are body measurements in inches, not flat garment widths. Back length measurements are in centimetres. The same size guide applies to our streetwear and armoured hoodies.

Body measurements (inches)

Length measurements (cm)

How to measure

Use a flexible tape, kept level and comfortably against your body without pulling tight. Measure around the fullest part of your chest and around your waist. For a back-length comparison, lay a well-fitting hoodie flat and measure down the centre back from the base of the neck to the hem. Consider whether you prefer a loose or snug fit when choosing your size.

From Road to Street

Nearly a decade of protecting riders. The same protection-grade mindset, now built for the streets. The OFFICIAL is where the full culture lives — every major mark, every chapter, every kilometre.

From the Bike.

To the Street.

Still 2WA.

This is OFFICIAL. There is no substitute.

Respect the Ride. 

The 2WA™ RESPECT Pullover Hoodie is built for those who know what the two-wheel life demands. Bold design. Uncompromising construction. A statement piece that earns its place every time you put it on.

Live it. Love it. Ride it. ™

The Design

Every rider knows the signal.

Two fingers down. A gesture passed between riders for generations — a silent acknowledgement between strangers who share the same road, the same risk, and the same respect for the ride.

That's where the 2WA™ RESPECT Logo began.

The respect is rendered in bold white line art across the full back of the hoodie — oversized, unmistakable, and impossible to miss. Two fingers down in the classic rider salute. And in the palm, worked into the design: the 2WA™ monogram — the hand itself becoming the "2" that completes Two Wheel Appeal.

It's not just a graphic. It's the signal. It's the code. It's RESPECT.

Below the Respect: TWOWHEELAPPEAL across the base in silver with EST. 2017 — marking the beginning of the journey.

Wrap the hood rim and you'll find the philosophy that started it all: LIVE IT. LOVE IT. RIDE IT.™

LIVE IT.

Live life to the fullest. Don't stand on the sidelines waiting for life to happen. Chase the experiences, take the chances and make the time you have count.

LOVE IT.

Find your people. Find the things that mean something to you. Hold onto friendships, family, passions and moments that make life worth living, and love what you do.

RIDE IT.

Because sometimes the best place to find and connect with yourself is behind the bars. We Ride for the freedom. We Ride for the escape. We Ride for the feeling because it's part of who we are.

On the chest, the 2WA™ RESPECT mark carries the signal forward — the same respect, the same meaning, keeping the front clean and deliberate.

Understated on the front. Undeniable on the back.

Carrying everything we stand for. Respect, Life, Love and the Ride

Crafted Without Compromise

BUILT THE 2WA WAY

Respect is earned. So is the right to put your name on something.

That's why we didn't take any chances. We built our own streetwear, our way, to our standards.

Built from the ground up using the same 465GSM heavyweight fleece as our ELITE Level II Armoured Ryder Hoodies — the same protection-grade thickness, same double stitched construction trusted by riders for nearly a decade.

No blanks, no white label products with a logo slapped on them. Built by the same team that's been protecting riders for nearly a decade.

2WA Quality — Without the Armour!

• 465GSM Premium Heavyweight Fleece — warmth, structure and durability built far beyond ordinary fast fashion weight
• Oversized 2WA™ RESPECT Back Graphic — the iconic two-fingers-down rider salute in white, with 2WA monogram worked into the palm in silver
• Raglan Sleeve Drop Shoulder — street-ready cut built for all-day comfort and confident presence
  
• Double-Layered Cordless Hood — Structured high-neck with the statement LIVE IT. LOVE IT. RIDE IT.™ running the hood, structured, warm, and clean — no dangling cords 
• All Embroidered Logos — every mark, patch and outline stitched in, no printed shortcuts
• Reinforced Double-Stitched Construction — the same build standard as our entire ELITE Armoured range
• All 2WA™ Own Tags — fully branded, no white-label shortcuts built by us from the ground up
• Extended thumb-through streetwear glove cuffs
• Large kangaroo front pocket
• Custom 2WA woven garment detailing
  

The Right Fit

The RESPECT Pullover is designed to fit true to our sizing — if you wear a 2XL in our ELITE Protective Hoodies, you're a 2XL here. Same sizing, same fit confidence. If you're between sizes or prefer a relaxed drape, size up.

Streetwear Hoodie Size Guide

Chest and waist figures are body measurements in inches, not flat garment widths. Back length measurements are in centimetres. The same size guide applies to our streetwear and armoured hoodies.

Body measurements (inches)

Length measurements (cm)

How to measure

Use a flexible tape, kept level and comfortably against your body without pulling tight. Measure around the fullest part of your chest and around your waist. For a back-length comparison, lay a well-fitting hoodie flat and measure down the centre back from the base of the neck to the hem. Consider whether you prefer a loose or snug fit when choosing your size.

From Road to Street

Nearly a decade of protecting riders. The same protection-grade mindset, now built for the streets. The RESPECT Pullover is for those who earned it.

From the Bike.

To the Street.

Still 2WA.

Respect is earned. Now wear it.

The Signature. Unmistakable.

The 2WA™ SIGNATURE Pullover Hoodie leads with the mark. The front carries the bold 2WA Signature Gradient Embroidery Logo — a large unique tonal, light-reactive chrome/silver fading rectangular statement centred on the chest, with TWOWHEELAPPEAL set inside in turquoise. Clean. Confident. No explanation needed.

Live it. Love it. Ride it. ™

The Design

SIMPLE WAS THE IDEA. ACHIEVING IT WASN'T.

The 2WA™ Signature was designed to be understated.

No oversized graphics. No conventional 3D puff embroidery. Instead, we wanted to use Signature to showcase just how far we could push embroidery design and construction.

The concept seemed simple:

Create an embroidered 2WA design that transitions from deep black through charcoal and gunmetal into silver — and changes appearance as the light and viewing angle move across it.

We were initially told it couldn't be done. Not with embroidery.

The first samples failed.

Further development revealed just how difficult the effect was to achieve. Creating the transition required an extremely complex, multi-layer embroidery construction within the design. We were advised that even if it could be achieved, it would be considerably more expensive to manufacture.

Our instruction was simple:

Don't design it to a price. Get it right.

Six months of development, prototypes and failed attempts followed, and the manufacturing team worked overtime.

Then, we got exactly what we were chasing.

2WA™ SIGNATURE GRADIENT EMBROIDERY

The finished Signature embroidery statement that creates a unique tonal, light-reactive effect across the chest.

Black transitions through charcoal and gunmetal into silver, while changes in available light and viewing angle cause different sections of the embroidery to strengthen, soften and fade.

From one angle, portions almost disappear into the black garment.

Move around it and the gunmetal emerges.

Change the light again and the silver comes alive.

Running through the centre, TWO WHEEL APPEAL embroidery in turquoise provides the unmistakable 2WA accent.

No print creating the illusion.

No shortcut.

It's embroidery.

Deliberately understated. Exceptionally difficult to execute.

Crafted Without Compromise

BUILT THE 2WA WAY

Signature isn't just about the embroidery.

It's built on our heavyweight premium streetwear hoodie construction, with a structured high-neck hood, distinctive shoulder construction, kangaroo pocket and extended thumb-through cuffs.

Across the lower back, understated embroidered branding

PROTECTIVE STREETWEAR
EST. 2017

Because before we made everyday streetwear, we spent years creating streetwear designed to protect riders.

The front shows where we are going. The back shows where we came from. That heritage isn't something we're leaving behind.

It's what earned us the right to make this collection.

Built from the ground up using the same 465GSM heavyweight fleece as our ELITE Level II Ryder Hoodies — the same protection-grade thickness trusted by riders for nearly a decade.

No blanks, no white label products with a logo slapped on them, built by the same team that's been protecting riders for nearly a decade.

2WA Quality — Without the Armour!

• 465GSM Premium Heavyweight Fleece — warmth, structure and durability built far beyond ordinary fast fashion weights
• Exclusive 2WA™ Signature Gradient Embroidery
  • Multi-layer precision embroidery construction
  • Black-to-charcoal-to-gunmetal-to-silver tonal transition
  • Light and viewing-angle reactive appearance
  • Contrasting TWO WHEEL APPEAL™ centre embroidery
  • Embroidered PROTECTIVE STREETWEAR — EST. 2017 rear detailing
• Raglan Sleeve Drop Shoulder — street-ready cut built for all-day comfort and confident presence
• Structured high-neck hood
• Double-Layered Cordless Hood — structured, warm, and clean — no dangling cords
• All Embroidered Logos — every mark stitched in, no printed shortcuts
• Reinforced Double-Stitched Construction — the same build standard as our entire ELITE Armoured range
• All 2WA™ Own Tags — fully branded, no white-label shortcuts built by us from the ground up
• Extended thumb-through streetwear glove cuffs
• Large kangaroo front pocket
• Custom 2WA woven garment detailing
  

The Right Fit

The SIGNATURE Pullover is designed to fit true to our sizing — if you wear a 2XL in our ELITE Protective Hoodies, you're a 2XL here. Same sizing, same fit confidence. If you're between sizes or prefer a relaxed drape, size up.

Streetwear Hoodie Size Guide

Chest and waist figures are body measurements in inches, not flat garment widths. Back length measurements are in centimetres. The same size guide applies to our streetwear and armoured hoodies.

Body measurements (inches)

Length measurements (cm)

How to measure

Use a flexible tape, kept level and comfortably against your body without pulling tight. Measure around the fullest part of your chest and around your waist. For a back-length comparison, lay a well-fitting hoodie flat and measure down the centre back from the base of the neck to the hem. Consider whether you prefer a loose or snug fit when choosing your size.

From Road to Street

Nearly a decade of protecting riders. The same protection-grade mindset, now built for the streets. The SIGNATURE Pullover is for those who let the mark do the talking.

From the Bike.

To the Street.

Still 2WA.

One logo. All the history behind it.

Where The Mark Began. Still CLASSIC

The 2WA™ CLASSIC® Pullover Hoodie carries the original premium mark and stamp of approval — and the first transition that helped create the 2WA identity we wear today.

The Design

THE ORIGINAL MARK. THE FIRST TRANSITION.

The CLASSIC is where the 2WA visual story began.

The CLASSIC Crest was our original premium mark — a stamp of trust, confidence and approval. If it carried this mark, it was something we stood behind.

Refined and restated here in gold with silver, the CLASSIC Crest carries EST. MMXVII and the rider philosophy that has travelled with us from the beginning.

But the front tells another part of the story.

Across the chest sits the very first transition from TWO WHEEL APPEAL to 2WA — the original TWO WHEEL APPEAL name running through the emerging 2WA mark.

Before 2WA became the mark it is today, there was this.

The transition that created it.

Rendered in silver, black and gold, it captures the point where the original name and the next generation of the brand became one.

Front and back, every detail is intentional.

The original mark.
The first transition.
The beginning of 2WA.

Classic by name. The foundation by design.

Live it. Love it. Ride it.

Crafted Without Compromise

BUILT THE 2WA WAY

The Classic is the original sign of our dedication to our quality and what we stand by.

That's why we didn't take any chances. We built our own streetwear, our way, to our standards.

Built from the ground up using the same 465GSM heavyweight fleece as our ELITE Level II Armoured Ryder Hoodies — the same protection-grade thickness, same double stitched construction trusted by riders for nearly a decade.

No blanks, no white label products with a logo slapped on them. Built by the same team that's been protecting riders for nearly a decade.

2WA Quality — Without the Armour!

• 465GSM Premium Heavyweight Fleece — warmth, structure and durability built far beyond ordinary fast fashion weight
• Oversized 2WA™ CLASSIC Back Embroidery — the original CLASSIC seal and stamp of approval rendered in Gold with Silver
• Raglan Sleeve Drop Shoulder — street-ready cut built for all-day comfort and confident presence
  
• Double-Layered Cordless Hood — Structured high-neck hood, warm and clean — no dangling cords 
• All Embroidered Logos — every mark, patch and outline stitched in, no printed shortcuts
• Reinforced Double-Stitched Construction — the same build standard as our entire ELITE Armoured range
• All 2WA™ Own Tags — fully branded, no white-label shortcuts built by us from the ground up
• Extended thumb-through streetwear glove cuffs
• Large kangaroo front pocket
• Custom 2WA woven garment detailing

The Fit

The CLASSIC runs with a drop-shoulder raglan cut — street-ready, relaxed, and built for all-day presence. The double-layered cordless hood sits structured and clean. No dangling cords. No cheap shortcuts. Just the kind of hoodie you put on and don't want to take off. Sized so you wear the same size as your protective hoodie.

Streetwear Hoodie Size Guide

Chest and waist figures are body measurements in inches, not flat garment widths. Back length measurements are in centimetres. The same size guide applies to our streetwear and armoured hoodies.

Body measurements (inches)

Length measurements (cm)

How to measure

Use a flexible tape, kept level and comfortably against your body without pulling tight. Measure around the fullest part of your chest and around your waist. For a back-length comparison, lay a well-fitting hoodie flat and measure down the centre back from the base of the neck to the hem. Consider whether you prefer a loose or snug fit when choosing your size.

From Road to Street

Nearly a decade of protecting riders. The same protection-grade mindset, now built for the streets. The CLASSIC Pullover is for those who have ridden alongside us from the beginning.

From the Bike.

To the Street.

Still 2WA.

The original. Reborn.

The Full Brand Expression on Your Back

The 2WA™ OFFICIAL Street TEE is the complete brand statement — every major 2WA™ mark, every philosophy, every attitude loaded onto one tee. This is what it looks like when a brand puts everything it stands for on your back.

Live it. Love it. Ride it.

The Full OFFICIAL Treatment

The front leads with the TWA RESPECT logo alongside the TWOWHEELAPPEAL wordmark and the Live It. Love It. Ride It.™ philosophy. The neck rib carries the feeling 2 Wheels 1 Mind Problems™ woven deep into the fabric. 

The upper back opens with the woven TWOWHEELAPPEAL heritage patch — Live It. Love It. Ride It.™ Protective Streetwear. EST. 2017. The philosophy that started it all, before the logos, before the range.

Below it, the full 2WA™ logo stack runs the length of the back in order:

• The 2WA CLASSIC™ Crest — the original premium mark
• The RESPECT — two fingers down, the rider's code, a mark of respect
• The TWA 210 Crest — the mark, badge and our seal of approval
• ATTITUDE! — because that's what this life demands
• The feeling 210 at the hem — closing the stack

Every mark carries its own story and journey.

The Fabric

Built from a premium 180GSM Cotton-Spandex blend — this isn't your average tee. The fabric delivers an exceptional soft skin feel with stretch that has to be felt to be believed. Light, breathable, and performance-ready, it moves with you whether you're on the street, at the gym, or putting in the hard yards.

The Fit

Cut oversized. Wear it your way. Our cotton-spandex Street TEEs give you three ways to wear the same design, from a loose silhouette to a closer fit.

Street Fit. Our Recommendation.

Go one size down from the 2WA™ hoodie size that fits you. Comfortable through the body, with room to move and a clean streetwear silhouette. Wear a 2XL hoodie? Choose an XL tee. The size chart below is tailored to our recommended Street Fit.

Oversized Fit

Stay with your 2WA™ hoodie size for more room and a relaxed drape. Wear a 2XL hoodie? Choose a 2XL tee.

Slim Fit

Go two sizes down from your 2WA™ hoodie size for a closer fit through the body, with the cotton-spandex fabric providing stretch as you move. Wear a 2XL hoodie? Choose an L tee.

Built to Last

The larger, thicker neck rib with woven in logo is engineered for strength and longevity — holding its shape and structure, ride after ride, wash after wash. No floppy collars, no shortcuts.

Crafted Without Compromise

The same team that has spent nearly a decade engineering protective gear built this collection. They brought that same obsessive attention to detail, the same refusal to ship something they weren't genuinely proud of. We took our time because streetwear was a new chapter for us — and getting it right mattered more than getting it out fast.

What you're wearing is the result of that process. And we're proud of every stitch.

• 180GSM Cotton-Spandex Blend — premium hand-feel, incredible stretch, holds its shape wash after wash
• Naturally Oversized Fit — size down for stretch or slim fit
• Light & Breathable — performance-ready for sport, gym, or street
• Reinforced Neck Rib — thicker, larger rib for lasting structure and strength
• Sewn-In Ribbed Neck Logo — built in, no cheap heat transfers
• All 2WA™ Own Tags — fully branded, no white-label shortcuts

Street TEE Size Guide

Chest and waist measurements are in inches and taken around the body, not across the tee laid flat. Back length is in centimetres. Use the guide below alongside your preferred fit.

Body measurements (inches)

Length measurements (cm)

How to measure

Use a flexible tape, kept level and comfortably against your body without pulling tight. Measure around the fullest part of your chest and around your waist. For a back-length comparison, lay a well-fitting tee flat and measure down the centre back from the base of the neck to the hem.

From Road to Street

The same protection-grade mindset, now in your everyday wear.

This is OFFICIAL. There is no substitute.

RESPECT. It's Not Given. It's Earned.

The 2WA™ RESPECT Street TEE is built for riders who know what it means to give and receive the nod. The RESPECT Logo — bold, full-back, unmistakable — says everything before you even open your mouth. Because on the road, respect isn't optional.

Live it. Love it. Ride it.™

The Design

Every rider knows the signal.

Two fingers down. A gesture passed between riders for generations — a silent acknowledgement between strangers who share the same road, the same risk, and the same respect for the ride.

That's where the 2WA™ RESPECT Logo began.

Rendered in bold white line art across the full back of the shirt — Two fingers extended in the classic rider salute. And in the palm, worked into the design: the 2WA™ monogram — the hand itself becoming the "2" that completes Two Wheel Appeal.

It's not just a graphic. It's the signal. It's the code. It's RESPECT.

Below the hand: TWOWHEELAPPEAL across the base in silver with EST. 2017 — marking the beginning of the journey. Stitched into the neck rib you'll find the philosophy that started it all: LIVE IT. LOVE IT. RIDE IT.™

On the chest, the 2WA™ RESPECT mark carries the signal forward — the same hand, the same meaning, keeping the front clean and deliberate.

Understated on the front. Undeniable on the back.

Carrying everything we stand for. Respect, Life, Love and the Ride

The Fabric

Built from a premium 180GSM Cotton-Spandex blend — this isn't your average tee. The fabric delivers an exceptional soft skin feel with stretch that has to be felt to be believed. Light, breathable, and performance-ready, it moves with you whether you're on the street, at the gym, or putting in the hard yards.

The Fit

Cut oversized. Wear it your way. Our cotton-spandex Street TEEs give you three ways to wear the same design, from a loose silhouette to a closer fit.

Street Fit. Our Recommendation.

Go one size down from the 2WA™ hoodie size that fits you. Comfortable through the body, with room to move and a clean streetwear silhouette. Wear a 2XL hoodie? Choose an XL tee. The size chart below is tailored to our recommended Street Fit.

Oversized Fit

Stay with your 2WA™ hoodie size for more room and a relaxed drape. Wear a 2XL hoodie? Choose a 2XL tee.

Slim Fit

Go two sizes down from your 2WA™ hoodie size for a closer fit through the body, with the cotton-spandex fabric providing stretch as you move. Wear a 2XL hoodie? Choose an L tee.

Built to Last

The larger, thicker neck rib — carrying the Live It. Love It. Ride It. ™ philosophy woven deep into the fabric — is engineered for strength and longevity, holding its shape and structure ride after ride, wash after wash. No floppy collars, no shortcuts. The philosophy never leaves you.

Crafted Without Compromise

The same team that has spent nearly a decade engineering protective gear built this collection. They brought that same obsessive attention to detail, the same refusal to ship something they weren't genuinely proud of. We took our time because streetwear was a new chapter for us — and getting it right mattered more than getting it out fast.

What you're wearing is the result of that process. And we're proud of every stitch.

• 180GSM Cotton-Spandex Blend — premium hand-feel, incredible stretch, holds its shape wash after wash
• Naturally Oversized Fit — size down for stretch or slim fit
• Light & Breathable — performance-ready for sport, gym, or street
• Reinforced Neck Rib — thicker, larger rib with the 2WA™ philosophy sewn in for lasting structure and strength
• Sewn-In Ribbed Neck Logo — built in, no cheap heat transfers
• All 2WA™ Own Tags — fully branded, no white-label shortcuts

Street TEE Size Guide

Chest and waist measurements are in inches and taken around the body, not across the tee laid flat. Back length is in centimetres. Use the guide below alongside your preferred fit.

Body measurements (inches)

Length measurements (cm)

How to measure

Use a flexible tape, kept level and comfortably against your body without pulling tight. Measure around the fullest part of your chest and around your waist. For a back-length comparison, lay a well-fitting tee flat and measure down the centre back from the base of the neck to the hem.

From Road to Street

The same protection-grade mindset, now in your everyday wear. Manufactured entirely in-house by the Two Wheel Appeal team — in the same factory, to the same specifications and standards as the outer shells of our ELITE Protective Streetwear range.

Wear the RESPECT. Ride the culture.