Last Chance — Discontinued to Make Way for Our New '26 OFFICIAL Design.
The 2WA™ ELITE Level II Armoured LIGHT V DARK OFFICIAL V2 Hoodie is being cleared as we make way for our all-new 2026 OFFICIAL Light V Dark design. Same protection-grade build, same genuine materials, same 460GSM heavy fleece — now at a significantly reduced price. Only a handful of sizes remain. Once they’re gone, this design is gone for good.
Protection You Can Feel Confident In
-
Removable & adjustable 2WA™ Level II Low-Profile Viscoelastic CE Approved Elbow/Forearm, Shoulder and Back Armour — soft and body-forming until impact, then superior shock absorption kicks in.
-
220GSM 100% Genuine DuPont™ Kevlar® knitted weave lining throughout the entire hoodie — not just high-risk areas. We don’t use cheaper blended Kevlar® materials that can cause abrasion burns, shrink, or reduce breathability over time.
-
2WA™ Custom Raglan RyderSleeves — our custom sleeve design creates a stronger shoulder area with less stitching and higher burst strength to better protect from impacts in a slide.
Built Different
-
460GSM in-house manufactured heavy fleece outer — one of the toughest fleece hoodies on the market. Triple-layered for warmth and breathability, making it a great mid-to-cold weather riding jacket.
-
2WA™ Thumbed RyderCuffs — specially designed for greater coverage and comfort in riding position, keeping sleeves in place and cold air out.
-
2WA™ RyderHood — double-lined inside and out to cushion around the back of the helmet and block wind effectively.
-
2WA™ Straight Cut RyderBak — designed for that urban street look with rider fit and comfort in mind.
-
2WA™ RyderLoop to attach to your 2WA™ joggers or jeans and keep everything in place on the bike.
-
High-quality superfine 100% poly mesh liner for comfort and airflow between rider and hoodie.
-
All embroidered 2WA™ logos for long-lasting style that won’t fade or peel.
Other brands charge extra for CE protectors or skimp on Kevlar®, only lining high-risk areas without disclosing grades. We use full 100% genuine 220GSM–260GSM DuPont™ Kevlar® weave and include CE Level II armour in every 2WA™ product — at no extra cost.
Armoured Hoodie Size Guide
Chest, waist and hip figures, where shown, are body measurements in inches, not flat garment widths. Length measurements are in centimetres.
| Size |
Chest (in) |
Waist (in) |
| XXS |
32–33 |
24–26 |
| XS |
33–34 |
26–28 |
| S |
35–36 |
28–30 |
| M |
37–38 |
30–32 |
| L |
39–40 |
32–34 |
| XL |
41–42 |
34–36 |
| 2XL |
43–44 |
36–38 |
| 3XL |
45–46 |
38–40 |
| 4XL |
47–48 |
40–42 |
| 5XL |
49–50 |
42–44 |
| 6XL |
51–52 |
44–46 |
Length measurements (cm)
| Size |
Back (cm) |
| XXS |
73 |
| XS |
74 |
| S |
75 |
| M |
76 |
| L |
77 |
| XL |
78 |
| 2XL |
79 |
| 3XL |
80 |
| 4XL |
81 |
| 5XL |
82 |
| 6XL |
83 |
How to measure
Keep a flexible tape level and comfortably against your body without pulling tight. Measure around the fullest part of your chest and around your waist. For length comparisons, lay a well-fitting garment flat and compare its length with the measurements above. Consider your preferred fit when choosing a size.
DuPont™ and Kevlar® are trademarks of affiliates of DuPont de Nemours, Inc.
All 2WA™ products are designed to the highest standard using only 100% genuine certified materials including DuPont™ Kevlar®, CE Certified Armour, YKK®, and Velcro®. Our products are designed to offer a layer of protection when armour is inserted correctly. They are not designed to prevent injury or death.
